科研论文
1.W.H. Zhou, F.H. Duan, Y.H. Meng, C.C. Zheng, H.M. Chen, A.G. Huang,Y.X. Wang, Y. Li. Effect of alloying oxygen on the microstructure and mechanical properties of Zr-based bulk metallic glass. Acta Materialia 220 (2021) 117345
2.Qianhao Zang, Xiaowen Li, Hongmei Chen, Jing Zhang, Ling Wang, Shujin Chen, Yunxue Jin and Sheng Lu. Microstructure and Mechanical Properties of AZ31/ZrO2 Composites Prepared by Friction Stir Processin With High Rotation Speed. Frontiers in Materials, 2020, 7: 1-9 3区
3.Dong Han, Hongmei Chen, Qianhao Zang, Yuxiang Qian, Hongwei Cui, Ling Wang, Jing Zhang, Yunxue Jin. Effect of solution treatment on microstructure and properties of Mg-6Gd-3Y-1.5Zn-0.6Zr alloy. Materials Characterization 163 (2020) 110295
4.Hongmei Chen, Dong Han, Hongwei Cui, Liang Zhang, Ling Wang, Jing Zhang and Yunxue Jin. Microstructures and properties of as-cast rare Earth magnesium alloy with LPSO phase. Materials Research Express 6 (2019) 0965a5 DOI: 10.1088/2053-1591/ab332d
5.陈洪美，廖斯恩，李晓文，张家齐，陈书锦，金云学. 搅拌摩擦加工制备 Nano-ZrO2增强 AZ31镁基复合材料及其力学性能分析. 稀有金属,2020, 44(3): 273-280
6.Hongmei Chen, Xiaowen Li, Sien Liao, Jing Zhang, Yunxue Jin, Hongwei Cui. Effect of ZrO2 Additions on Fabrication of ZrO2/Mg Composites Via Friction-stir Processing, Materiali in Tehnologije / Materials and Technology, 53 (2019) 2: 193-197. 国基，省基，博后基金 4区
DOI: 10.17222/mit.2018.004
7.Hongmei Chen and Xiaowen Li, Microstructure and Damping Capacity of ZK60 Alloy Sheets Fabricated by Twin Roll Casting and Hot Rolling Process, International Journal of Corrosion, 2019, 2618737, 1-5, https://doi.org/10.1155/2019/2618737
8.Hongmei Chen, Sien Liao, Xuan Lu, Nannan Wang, Zhuxian Yang, Yu Chen, YongdeXia, Yanqiu Zhu. The preparation of SiC nanowires reinforced porous carbon nanocomposites by simple method. Materials Chemistry and Physics.2018,219: 258-262.
https://doi.org/10.1016/j.matchemphys.2018.07.041
9.Yu Chen, Oluwafunmilola Ola, Hongmei Chen, Nannan Wang, Yongde Xia, and Yanqiu Zhu, SiC Nanowire Sponges as Electropressure Sensors, ACS Applied Nano Materials, 2019, 2, 12, 7540–7548
10.Yi-Quan Zhao, Hong-Mei Chen, Jing Zhang, Ru Ma, Yan-Dong Liu, Yi-Nong Wang, Ling Wang, Qun Zhang, Wei-Gang Li, Influences of Asymmetric Reduction Rolling on the Microstructure and Mechanical Properties of AZ91, Acta Metallurgica Sinica (English Letters) , 2018, 31: 673-380
11.Ling Wang, Yi-Quan Zhao, Hong-Mei Chen, Jing Zhang, Yan-Dong Liu, Yi-Nong Wang, Improvement of Mechanical Properties of Magnesium Alloy ZK60 by Asymmetric Reduction Rolling, Acta Metallurgica Sinica (English Letters), 2018,31:63-70
12.Sakineh Chabi, Esther Garcia-Tunon, Hongmei Chen, Yongde Xia, Eduardo G. Saiz, Yanqiu Zhu. In-situ compression and electrochemical studies of graphene foam. Veruscript Functional Nanomaterials. 2018, https://doi.org/10.22261/FNAN.UMPBGN
13.李志清, 陈洪美, 郭伟朋, 张静, 金云学. 累积叠轧ZK60/Al复合板材的微观组织及性能研究. 特种铸造及有色合金. 2018, 38(9): 998-1002. （通讯作者）
14.朱嘉楠, 李志清, 陈洪美, 胡冰周. Mg-Gd-Y-Zn-Zr稀土镁合金的组织性能. 特种铸造及有色合金. 2018, 38(5): 571-574. （通讯作者）
15.郭伟朋, 李晓文, 陈洪美, 张静, 金云学. 退火工艺对 Al/Mg/Al 复合板组织及界面扩散的影响. 金属热处理. 2018, 43(2): 91-95. （通讯作者）
16.F Y Lan, H M Chen, W P Guo, J Zhang, and Y X Jin.Effects of Friction Stir Processing on Mechanical Properties and Damping Capacities of AZ31 Magnesium Alloys. International Conference on Materials Sciences and Nanomaterials, 230(2017)012013
17.Nannan Wang, Zhuxian Yang, Fang Xu, Kunyapat Thummavichai, Hongmei Chen, Yongde Xia & Yanqiu Zhu, A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites, Scientific Reports, DOI:10.1038/s41598-017-12200-1
18.Nannan Wang, Zhuxian Yang, Kunyapat Thummavichai, Fang Xu, Chenxi Hu, Hongmei Chen, Yongde Xia & Yanqiu Zhu. Novel graphitic carbon coated IF-WS2 reinforced poly(ether ether ketone) nanocomposites, RSC Advances, 2017, 7,35265-35273
19.Zhuxian Yang, Hongmei Chen, Nannan Wang, Yongde Xia and Yanqiu Zhu. Permeability studies on 3D Ni foam/graphene composites. Journal of Physics D: Applied Physics. 50 (2017) 385303: 1-8. (二区，2.588)
20.ZANG Qian-Hao, CHEN Hong-Mei, LAN Fang-Yuan, ZHANG Jing, JIN Yun-Xue. Effect of friction stir processing on microstructure and damping capacity of AZ31 alloy. Journal of Central South University, 2017, 24: 1034−1039（通讯作者）
21.臧千昊, 刘忠明，陈洪美，张静，金云学. 热处理对双辊铸轧 ZK60 镁合金组织及阻尼性能的影响（Effect of Heat Treatment on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy）. 稀有金属材料与工程. 2016, 45(6): 1578-1582（通讯）
22.陈洪美，臧千昊，刘忠明，张静，金云学. T6 处理对双辊铸轧 ZK30-Y镁合金组织与性能的影响. 江苏科技大学学报(自然科学版). 2016, 30(3): 227-231（优先出版）
23.Chen Hongmei, Liu Zhongming, Zang Qianhao, Yu Xin, Zhang Jing and Jin Yunxue. Effect of Heat Treatment on High Temperature Damping Capacity of ZK60 Sheet Produced by Twin-roll Casting and Hot-rolling. Chiang Mai Journals of Science, 2016, 43(2) : 351-357
24.Zhongming Liu, Hongmei Chen, Weipeng Guo, Jing Zhang and Yunxue Jin. Interface and Damping Capacity of Mg/Al Multilayered Composite Produced by Accumulative Roll Bonding. Materials Science Forum, 2016, 849: 838-843 (Corresponding Author)
25.Chen Hongmei, Zang Qianhao, Yu Hui, Zhang Jing, Jin Yunxue. Effect of Intermediate Annealing on the Microstructure and Mechanical Property of ZK60 Magnesium Alloy Produced by Twin Roll Casting and Hot Rolling. Materials Characterization, 2015, 106: 437-441
26.Hongmei Chen, Qianhao Zang, Jing Zhang, Jaehyung Cho, Yunxue Jin and Yuke Shi. Effect of Heat Treatment on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Strip, Magnesium Technology 2015, 2015: 267-271
27.陈洪美, 臧千昊, 张静, 金云学. 项宏福. 冷轧ＴＣ４钛合金管材的织构研究. 特种铸造及有色合金. 2015, 35(10): 1012-1015
28.Jing Zhang, Hongmei Chen, Hui Yu and Yunxue Jin. Study on Dual Modification of Al-17%Si Alloys by Structural Heredity. Metals, 2015, 5:1112-1126
29.Q. H. Zang, H. M. Chen, J. Zhang, J. H. Cho, Y. X. Jin and Y. K. Shi. Effect of hot rolling on microstructure and damping capacity of Twin Roll Cast ZK60 alloy. Materials Research Innovations, 2015, 19(S4): S102-105. (Corresponding Author)
30.Zang Qianhao, Shi Yuke, Chen Hongmei, Zhang Jing and Jin Yunxue. Effect of Annealing Temperature on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy. Advanced Materials Research, 2015,1095: 87-90. (Corresponding Author)
31.Jing Zhang, Huashun Yu, Xinting Shuai, Hongmei Chen and Guanghui Min. Preparation of Al2O3/Al-Si Composites by In-situ Reaction of Fe2O3+MnO2/Al System. Materials Science Forum, 2015, 816:48-53
32.Hongmei Chen, Huashun Yu, Guanghui Min, Yunxue Jin, Study on the Microstructure and Texture of Warm Rolled ZK60 Magnesium Alloy Sheet, Advanced Materials Research, 2012,557-559: 1344-1348.
33.Chen Hongmei, Yu Huashun, Kang Suk Bong, Min Guanghui, Jin Yunxue. Effect of forming process on microstructure and mechanical properties of ZK60 alloy sheet. 稀有金属材料与工程, 2011, 40(10): 1708-1712.
34.CHEN Hong-mei, YU Hua-shun, KANG Suk-bong, Min Guang-hui, JIN Yun-xue.Effect of Rolling Temperature on Microstructure and Texture of Twin Roll Cast ZK60 Magnesium Alloy. Transactions of Nonferrous Metals Society of China, 2010, 20(11): 2086-2091
35.Hongmei Chen, Huashun Yu ,Suk Bong Kang, Guanghui Min. Texture development in a twin roll cast and warm rolled ZK60 magnesium alloy. In: S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, ed. Magnesium Technology 2010. Warrendale, Pennsylvania: TMS 2010:559-562
36.Hongmei Chen, Huashun Yu, Suk Bong Kang, Jae Hyoung Cho, Guanghui Min, Optimization of annealing treatment parameters in a twin roll cast and warm rolled ZK60 alloy sheet, Materials Science and Engineering A, 2010, 527(4-5):1236-1242
37.Hongmei Chen, Huashun Yu, Suk Bong Kang, Guanghui Min, Optimization of annealing treatment parameters in a twin roll cast and warm rolled Mg-4.5Al-1.0Zn alloy, Advanced Materials Research, 79-82 (2009), 2139-2142
38.Hongmei Chen, Suk Bong Kang, Huashun Yu, Jaehyung Cho, Hyoung Wook Kim, Guanghui Min. Effect of heat treatment on microstructure and mechanical properties of twin roll cast and sequential warm rolled ZK60 alloy sheets, Journal of Alloys and Compounds, 2009, 476(1-2): 324-328
39.Hongmei Chen, Suk Bong Kang, Huashun Yu, Hyoung Wook Kim, Guanghui Min. Microstructure and mechanical properties of Mg-4.5Al-1.0Zn alloy sheets produced by twin roll casting and sequential warm rolling. Materials Science and Engineering A,2008, 492(1-2): 317–326
40.陈洪美, Suk-Bong Kang, 于化顺, 闵光辉.AZ451镁合金薄带的组织和力学性能研究.金属学报.2008,44(4),397-402
41.陈洪美, Suk Bong Kang, 于化顺, Hyoung Wook Kim, 闵光辉.钙对AZ451变形镁合金组织和性能的影响.特种铸造及有色合金.2008, 28(3): 173-177
42.陈洪美, Suk-Bong Kang, 于化顺, 闵光辉.温轧变形对双辊铸轧Z60镁合金组织和性能的影响.材料科学与工艺.2008, 增刊1:42-46
43.Hongmei Chen, Huashun Yu, Jing Zhang, Lin Zhang, and Guanghui Min. Microstructure and mechanical properties of Al2O3-TiC/Al in situ Composites.Key Engineering Materials, 2006, 326-328:1857-1860
44.陈洪美, 于化顺, 张静, 闵光辉.原位反应法制备Al2O3-TiC/Al复合材料.特种铸造及有色合金.2006, 26(10):674-675
45.陈俊，陈洪美，于化顺，闵光辉，金云学. 双辊铸轧镁合金的组织及其形成机理研究. 江苏科技大学学报( 自然科学版). 2011, 25(1): 35-38.
46.Jae-Hyung Cho, Hong-Mei Chen, Shi-Hoon Choi, Hyoung-Wook Kim,Suk-Bong Kang, Aging Effect on Texture Evolution during Warm Rolling of ZK60 Alloys Fabricated by Twin-Roll Casting, Metallurgical and Materials Transactions A, 2010, 41(10): 2575-2583
47.Suk Bong Kang, Hongmei Chen, Hyoung Wook Kim, Jae Hyoung Cho, Effect of Reheating and Warm Rolling on Microstructure and Mechanical Properties of Twin Roll Strip Cast Mg-4.5Al-1.0Zn-0.4Mn-0.3Ca Alloy Sheet, In: M.O. Pekguleryuz, N.R.Neelameggham, R.S.Beals, and E.A.Nyberg, ed., Magnesium Technology 2008, Warrendale, Pennsylvania: TMS, 2008:147-152
48.YU Huashun, CHEN Hongmei, MA Rendian, and MIN Guanghui.The fabrication of AlN-TiC/Al composites by gas injection processing. RARE METALS. 2006,25(6) :659-664
49.YU Huashun, CHEN Hongmei, SUN Liming, and MIN Guanghui.Preparation of Al-Al3Ti in-situ composites by direct reaction method. RARE METALS. 2006, 25(1):32-36
50.JIN Yun-xue, LI Kai-yue, CHEN Hong-mei，XIANG Hong-fu. Effect of rolling process on microstructure and texture of cold rolled Ti-6Al-4V seamless tubes. Advanced Materials Research, 2012,557-559: 191-197.
51.金云学，李凯玥，陈洪美，项宏福. 轧制工艺对Ti-6Al-4V无缝管材力学性能的影响. 金属热处理. 2012, 37(9): 88-91
52.Zhang Jing, Yu Huashun, Chen Hongmei and Min Guanghui, Al-Si/Al2O3 in situ composite prepared by displacement reaction of CuO/Al system, China Foundry, 2010, 7(1): 19-23
53.金云学, 王小丫, 童强强,陈洪美, Jung-Moo LEE. 温度对铸态SiCp/A356 复合材料滑动摩擦磨损特性的影响. 有色金属学报. 2014, 24(1): 179-187
54.Kang Suk Bong, Cho Jaehyung; Kim Hyoung Wook; Chen Hongmei; Yu Huashun; Min Guanghui. Effect of Warm Rolling and Heat Treatment on Microstructure and Mechanical Properties in Twin Roll Cast ZK60 alloy Sheet. In: Magnesium Technology, 2009, p 373-377
55.张静, 张国玲, 于化顺, 陈洪美. Fe2O3/Al体系制备Al2O3粒子增强铝基复合材料. 特种铸造及有色合金. 2009, 29(1): 60-62
56.Lin Zhang, Guanghui Min, Huashun Yu, Hongmei Chen, Gang Feng. The Size and Morphology of Fine CaB6 Powder Synthesized by Nanometer CaCO3 as Reactant.Key Engineering Materials, 2006, 326-328:369-372
57. Wang Haitao, Yu Huashun, Wang Zhichen, Zhang Jing, Chen Hongmei, Min Guanghui. Effects of scale
composition on oxidation kinetics of Fe-based superalloy. JOURNAL OF WUHAN UNIVERSITY OF
TECHNOLOGY. 2010, 25(1): 99-103
著作：
1. 陈洪美, 高强高阻尼镁合金的制备加工技术研究, 2018.7, 江苏大学出版社.
