1.DongguangYan,BingbingFeng,ShilongZhao,ChengyuGu,YingqiangFan,Robust phase change materials based on PBAT-block-PEG multiblock copolymers with novel thermostability prepared via facile melt transesterification,Journal of Energy Storage,2024,84,110895.
2.Dongguang Yan,Shilong Zhao,Chi Ge, Jianzhou Gao, Chengyu Gu, Yingqiang Fan,PBT/adipic acid modified PEG solid-solid phase change composites,Journal of Energy Storage,2022,52,104753.
3.Dajiang Zhao,Dongguang Yan,Xubing Fu,Na Zhang,Guisheng Yang,Rheological and Crystallization Properties of ABS/PA6 Compatibilized Blends via In Situ Reactive Extrusion,ACS Omega,2020, 25, 15257.
4.Dajiang Zhao,Dongguang Yan,Xubing Fu,Na Zhang,Guisheng Yang,Effect of ABS types on the morphology and mechanical properties of PA6/ABS blends by in situ reactive extrusion,Materials Letters,2020, 274, 128013.
5.Dajiang Zhao,Dongguang Yan,Na Zhang,Guisheng Yang,Preparation of super-toughened PA6 with submicron-sized ABS by in situ reactive extrusion method,Materials Letters,2019, 251,18.
6.闫东广,张远,周昱,裴承度,一步法制备聚酰胺聚醚弹性体及其在抗静电ABS材料中的应用,高分子材料科学与工程,2020,36(2):155-160.
7.闫东广,宋玮琦,王春亭,裴承度,聚酰胺聚醚弹性体/石墨烯纳米复合材料的制备与表征,高分子材料科学与工程,2019,35(4):161-165.
8.闫东广,王春亭,刘晓栋,宋玮琦,李照磊,反应挤出原位阴离子聚合尼龙6/石墨烯复合微球的连续制备与表征,高分子材料科学与工程,2018,34(12):101-105.
9.李姜红,王春亭,闫东广,聚醚酰胺嵌段共聚物相变储能材料,高分子材料科学与工程,2017,12, 124-127.
10.Dongguang Yan*, Jiao Li, Jianghong Li, Hongzhi Liu, Haijun Zhou, Guochun Shen,Novel polyamide 6/polystyrene in situ microfibrillar blends prepared by anionic polymerization of є-caprolactam via reactive extrusion,Macromolecular Materials and Engineering,2016 , 301 (10) :1242-1247.
11.Xubing Fu,Xingke Zhao,Dongguang Yan,Dajiang Zhao,Jiao Li, Guisheng Yang,RSC Advances,2015, 5, 77316-77323.
12.Dongguang Yan,Guang Li, Mingyue Huang, Chao Wang, Tough polyamide 6/core–shell blends prepared via in situ anionic polymerization of ε-caprolactam by reactive extrusion, Polymer Engineering & Science, 2013, 53, 2705-2710.
13.Dongguang Yan, Liang Dong, Jiao Li, Faliang Luo. Tough polyamide 6/core-shell blends by reactive extrusion. SPE Plastics Research Online, 2013, DOI:10.2417/spepro.005142, Published Online.
14.闫东广, 李广, 董亮, 黄明越, 原位反应挤出PA6/SEBS/MMT三元复合材料及其表征, 塑料工业, 2013, 11, 62-65.
15.黄明越,王静,宦重阳,闫东广,反应挤出PA6/SEBS原位合金的制备与表征,塑料工业,2013,41(3),30-34.
16.Dongguang Yan, Guisheng Yang, Effect of multi-walled carbon nanotubes on the morphology and electrical properties of polyamide 6/polystyrene blends prepared via successive polymerization, Journal of Applied Polymer Science, 2012, 125, E167-E174.
17.Dongguang Yan, Guisheng Yang, In situ synthesis of polyamide 6/MWNTs nanocomposites by anionic ring opening polymerization, Journal of Applied Polymer Science, 2009, 111 (3), 1278-1285.
18.Dongguang Yan, Tingxiu Xie, Guisheng Yang, A novel approach of in situ grafting polyamide 6 to the surface of multi-walled carbon nanotubes, Materials Letters. 2009, 63 (2), 298-300.
19.Dongguang Yan, Tingxiu Xie, Guisheng Yang, Synthesis and properties of homogeneously dispersed polyamide 6/MWNTs nanocomposites via simultaneous in situ anionic ring opening polymerization and compatibilization. Journal of Applied Polymer Science, 2009, 112 (6), 3620-3626.
20.Dongguang Yan, Guisheng Yang, An innovative method to improve the electrical conductivity of multi-walled carbon nanotubes filled polyamide 6/polystyrene blends, Materials Letters, 2009, 63 (22), 1900-1903.