机械工程学院
通讯地址：镇江市梦溪路2号
个人邮箱：
邮政编码：
办公地点：
传真：
钟伟，男，1983年生，博士，教授，硕士生导师。主要从事气压传动及控制、气体润滑理论与应用技术和工业自动化测试等研究工作。2017年入选江苏省“青蓝工程”优秀青年骨干教师培养计划，2019年入选江苏省“六大人才高峰”高层次人才培养计划。近年来的研究重点包括：（1）多孔介质流量特性的解析；（2）半导体元件（如液晶玻璃基板、半导体硅片）的气浮输运系统的研发及物理现象的解析；（3）工业自动化测试设备及系统研发。获得2项国家自然科学基金项目资助，发表论文30余篇，其中SCI/EI收录24篇，已获得授权发明专利8项。
1.气动电子技术
2.气体润滑理论与应用技术
3.工业自动化测试及控制
随着工业技术的迅速发展，气动系统己被广泛应用于工业生产的各个领域。在气动元件选型及系统的设计过程中，准确地把握元件的流量特性非常重要，如何对各种不同的气动元件的流量特性进行描述以及利用尽可能节省能源的方式来进行测试，成为全球的研究热点。当前，多孔质作为一种重要的材料，被广泛应用于空气过滤器、消音器、换热器和气浮轴承等元件中。多孔质是一种内部由相互贯通或封闭的孔洞而构成网络结构的材料，其具有重量轻、隔音、隔热、渗透性好等优点，把握这一类多孔质气阻的流量特性对其在工业上的应用具有极大的促进作用。
局部多孔质气浮输运的气膜特性及控制策略研究（51205174），国家自然科学青年基金，2013.01-2015.12，25万
基于气流粘性牵引机理的完全无接触输运与定位方法研究（51675247），国家自然科学基金面上项目，2017.01-2020.12，62万
201410626307.2一种气浮输运装置
2016年
Yuxuan Liao, Xin Li, Wei Zhong, Guoliang Tao: Study of pressure drop-flow rate and flow resistance characteristics of heated porous materials under local thermal non-equilibrium conditions. International Journal of Heat and Mass Transfer 11/2016; 102. DOI:10.1016/j.ijheatmasstransfer.2016.05.101
Wei Zhong, Ke Xu, Xin Li, Yuxuan Liao, Guoliang Tao, Toshiharu Kagawa: Determination of pressure drop for air flow through sintered metal porous media using a modified Ergun equation. Advanced Powder Technology 04/2016; 27(4). DOI:10.1016/j.apt.2016.03.024
Yuxuan Liao, Xin Li, Zhong Wei, Guoliang Tao, H Liu, Toshiharu Kagawa: Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials. Journal of Fluids Engineering 02/2016; 138(7). DOI:10.1115/1.4032751
Wei Zhong, Xin Li, Guo-liang Tao, Bo Lu, Toshiharu Kagawa: Theoretical and experimental investigation on optimization of a non-contact air conveyor. Journal of Central South University 02/2016; 23(2). DOI:10.1007/s11771-016-3080-6
Wei Zhong, Ke Xu, Xin Li, Guoliang Tao, Toshiharu Kagawa: Study on the basic characteristics of a contactless air film conveyor using viscous traction. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210) 01/2016; 230(9). DOI:10.1177/1350650116629905
2015年
Wei Zhong, Xin Li, Guoliang Tao, Toshiharu Kagawa: Measurement and Determination of Friction Characteristic of Air Flow through Porous Media. Metals - Open Access Metallurgy Journal 03/2015; 5(1). DOI:10.3390/met5010336
2014年
Li Xin, Wei Zhong, Toshiharu Kagawa, Hao Liu, Guoliang Tao: Development of a Pneumatic Sucker for Gripping Workpieces With Rough Surface. IEEE Transactions on Automation Science and Engineering 10/2014; 13(2). DOI:10.1109/TASE.2014.2361251
P.-F. Qian, G.-L. Tao, D.-Y. Meng, W. Zhong, W. Ban, X. Zhu: Sliding mode trajectory tracking control of electro-pneumatic clutch actuator. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 06/2014; 48(6). DOI:10.3785/j.issn.1008-973X.2014.06.019
Wei Zhong, Xin Li, Fanghua Liu, Guoliang Tao, Bo Lu, Toshiharu Kagawa: Measurement and Correlation of Pressure Drop Characteristics for Air Flow Through Sintered Metal Porous Media. Transport in Porous Media 01/2014; 101(1). DOI:10.1007/s11242-013-0230-2
2013年
Wei Zhong, Xin Li, Fanghua Liu, Daohua Lu, Guoliang Tao, Toshiharu Kagawa: Modelling and experimental validation of dynamic characteristics of porous-walled air film for non-contact conveyor system. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210) 07/2013; 227(7). DOI:10.1177/1350650112466619
Q. Liu, G.-L. Tao, W. Zhong, W. Ban: Development of in-out-burst pneumatic on/off valve. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 05/2013; 47(5). DOI:10.3785/j.issn.1008-973X.2013.05.008
P.-F. Qian, G.-L. Tao, H. Liu, B. Lu, W. Zhong: Stick-slip characteristics of pneumatic cylinder based on meter-in circuit.
2012年以前
W. Zhong, H. Liu, G.-L. Tao, X. Li, T. Kagawa: Theoretical and experimental study on pressure characteristics of air film for levitation using porous media. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 04/2012; 46(4). DOI:10.3785/j.issn.1008-973X.2012.04.007
Feng Zhang, Hao Liu, Guo Liang Tao, Wei Zhong: Design, Modeling and Simulation of an Innovation Pneumatic High Speed on-Off Valve Based on Giant Magnetostrictive Material. 12/2011; 422. DOI:10.4028/www.scientific.net/AMR.422.243
Wei Zhong, Guoliang Tao, Xin Li, Kenji Kawashima, Toshiharu Kagawa: Determination of Flow Rate Characteristics of Porous Media Using Charge Method. Flow Measurement and Instrumentation 06/2011; 22(3). DOI:10.1016/j.flowmeasinst.2011.02.002
Wei Zhong, Guoliang Tao, Xin Li, Kenji Kawashima, Toshiharu Kagawa: Analysis of levitation using porous media.
W. Zhong, G. Tao, X. Li, K. Kawashima, T. Kagawa: Analysis on flow rate characteristics of porous materials.
Zhong Xiang, Hao Liu, Guo-Liang Tao, Jun Man, Wei Zhong: Development of an ε-type actuator for enhancing high-speed electro-pneumatic ejector valve performance. Journal of Zhejiang University - Science A: Applied Physics & Engineering 11/2008; 9(11). DOI:10.1631/jzus.A0820350
W. Zhong, G.-L. Tao, H. Liu, Z. Xiang: Mathematical modeling and simulation of pneumatic nail gun. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 02/2008; 42(2).
随着工业技术的迅速发展，气动系统己被广泛应用于工业生产的各个领域。在气动元件选型及系统的设计过程中，准确地把握元件的流量特性非常重要，如何对各种不同的气动元件的流量特性进行描述以及利用尽可能节省能源的方式来进行测试，成为全球的研究热点。当前，多孔质作为一种重要的材料，被广泛应用于空气过滤器、消音器、换热器和气浮轴承等元件中。多孔质是一种内部由相互贯通或封闭的孔洞而构成网络结构的材料，其具有重量轻、隔音、隔热、渗透性好等优点，把握这一类多孔质气阻的流量特性对其在工业上的应用具有极大的促进作用。
局部多孔质气浮输运的气膜特性及控制策略研究（51205174），国家自然科学青年基金，2013.01-2015.12，25万
基于气流粘性牵引机理的完全无接触输运与定位方法研究（51675247），国家自然科学基金面上项目，2017.01-2020.12，62万
201410626307.2一种气浮输运装置
2016年
Yuxuan Liao, Xin Li, Wei Zhong, Guoliang Tao: Study of pressure drop-flow rate and flow resistance characteristics of heated porous materials under local thermal non-equilibrium conditions. International Journal of Heat and Mass Transfer 11/2016; 102. DOI:10.1016/j.ijheatmasstransfer.2016.05.101
Wei Zhong, Ke Xu, Xin Li, Yuxuan Liao, Guoliang Tao, Toshiharu Kagawa: Determination of pressure drop for air flow through sintered metal porous media using a modified Ergun equation. Advanced Powder Technology 04/2016; 27(4). DOI:10.1016/j.apt.2016.03.024
Yuxuan Liao, Xin Li, Zhong Wei, Guoliang Tao, H Liu, Toshiharu Kagawa: Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials. Journal of Fluids Engineering 02/2016; 138(7). DOI:10.1115/1.4032751
Wei Zhong, Xin Li, Guo-liang Tao, Bo Lu, Toshiharu Kagawa: Theoretical and experimental investigation on optimization of a non-contact air conveyor. Journal of Central South University 02/2016; 23(2). DOI:10.1007/s11771-016-3080-6
Wei Zhong, Ke Xu, Xin Li, Guoliang Tao, Toshiharu Kagawa: Study on the basic characteristics of a contactless air film conveyor using viscous traction. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210) 01/2016; 230(9). DOI:10.1177/1350650116629905
2015年
Wei Zhong, Xin Li, Guoliang Tao, Toshiharu Kagawa: Measurement and Determination of Friction Characteristic of Air Flow through Porous Media. Metals - Open Access Metallurgy Journal 03/2015; 5(1). DOI:10.3390/met5010336
2014年
Li Xin, Wei Zhong, Toshiharu Kagawa, Hao Liu, Guoliang Tao: Development of a Pneumatic Sucker for Gripping Workpieces With Rough Surface. IEEE Transactions on Automation Science and Engineering 10/2014; 13(2). DOI:10.1109/TASE.2014.2361251
P.-F. Qian, G.-L. Tao, D.-Y. Meng, W. Zhong, W. Ban, X. Zhu: Sliding mode trajectory tracking control of electro-pneumatic clutch actuator. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 06/2014; 48(6). DOI:10.3785/j.issn.1008-973X.2014.06.019
Wei Zhong, Xin Li, Fanghua Liu, Guoliang Tao, Bo Lu, Toshiharu Kagawa: Measurement and Correlation of Pressure Drop Characteristics for Air Flow Through Sintered Metal Porous Media. Transport in Porous Media 01/2014; 101(1). DOI:10.1007/s11242-013-0230-2
2013年
Wei Zhong, Xin Li, Fanghua Liu, Daohua Lu, Guoliang Tao, Toshiharu Kagawa: Modelling and experimental validation of dynamic characteristics of porous-walled air film for non-contact conveyor system. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210) 07/2013; 227(7). DOI:10.1177/1350650112466619
Q. Liu, G.-L. Tao, W. Zhong, W. Ban: Development of in-out-burst pneumatic on/off valve. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 05/2013; 47(5). DOI:10.3785/j.issn.1008-973X.2013.05.008
P.-F. Qian, G.-L. Tao, H. Liu, B. Lu, W. Zhong: Stick-slip characteristics of pneumatic cylinder based on meter-in circuit.
2012年以前
W. Zhong, H. Liu, G.-L. Tao, X. Li, T. Kagawa: Theoretical and experimental study on pressure characteristics of air film for levitation using porous media. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 04/2012; 46(4). DOI:10.3785/j.issn.1008-973X.2012.04.007
Feng Zhang, Hao Liu, Guo Liang Tao, Wei Zhong: Design, Modeling and Simulation of an Innovation Pneumatic High Speed on-Off Valve Based on Giant Magnetostrictive Material. 12/2011; 422. DOI:10.4028/www.scientific.net/AMR.422.243
Wei Zhong, Guoliang Tao, Xin Li, Kenji Kawashima, Toshiharu Kagawa: Determination of Flow Rate Characteristics of Porous Media Using Charge Method. Flow Measurement and Instrumentation 06/2011; 22(3). DOI:10.1016/j.flowmeasinst.2011.02.002
Wei Zhong, Guoliang Tao, Xin Li, Kenji Kawashima, Toshiharu Kagawa: Analysis of levitation using porous media.
W. Zhong, G. Tao, X. Li, K. Kawashima, T. Kagawa: Analysis on flow rate characteristics of porous materials.
Zhong Xiang, Hao Liu, Guo-Liang Tao, Jun Man, Wei Zhong: Development of an ε-type actuator for enhancing high-speed electro-pneumatic ejector valve performance. Journal of Zhejiang University - Science A: Applied Physics & Engineering 11/2008; 9(11). DOI:10.1631/jzus.A0820350
W. Zhong, G.-L. Tao, H. Liu, Z. Xiang: Mathematical modeling and simulation of pneumatic nail gun. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 02/2008; 42(2).
随着工业技术的迅速发展，气动系统己被广泛应用于工业生产的各个领域。在气动元件选型及系统的设计过程中，准确地把握元件的流量特性非常重要，如何对各种不同的气动元件的流量特性进行描述以及利用尽可能节省能源的方式来进行测试，成为全球的研究热点。当前，多孔质作为一种重要的材料，被广泛应用于空气过滤器、消音器、换热器和气浮轴承等元件中。多孔质是一种内部由相互贯通或封闭的孔洞而构成网络结构的材料，其具有重量轻、隔音、隔热、渗透性好等优点，把握这一类多孔质气阻的流量特性对其在工业上的应用具有极大的促进作用。
局部多孔质气浮输运的气膜特性及控制策略研究（51205174），国家自然科学青年基金，2013.01-2015.12，25万
基于气流粘性牵引机理的完全无接触输运与定位方法研究（51675247），国家自然科学基金面上项目，2017.01-2020.12，62万
201410626307.2一种气浮输运装置
2016年
Yuxuan Liao, Xin Li, Wei Zhong, Guoliang Tao: Study of pressure drop-flow rate and flow resistance characteristics of heated porous materials under local thermal non-equilibrium conditions. International Journal of Heat and Mass Transfer 11/2016; 102. DOI:10.1016/j.ijheatmasstransfer.2016.05.101
Wei Zhong, Ke Xu, Xin Li, Yuxuan Liao, Guoliang Tao, Toshiharu Kagawa: Determination of pressure drop for air flow through sintered metal porous media using a modified Ergun equation. Advanced Powder Technology 04/2016; 27(4). DOI:10.1016/j.apt.2016.03.024
Yuxuan Liao, Xin Li, Zhong Wei, Guoliang Tao, H Liu, Toshiharu Kagawa: Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials. Journal of Fluids Engineering 02/2016; 138(7). DOI:10.1115/1.4032751
Wei Zhong, Xin Li, Guo-liang Tao, Bo Lu, Toshiharu Kagawa: Theoretical and experimental investigation on optimization of a non-contact air conveyor. Journal of Central South University 02/2016; 23(2). DOI:10.1007/s11771-016-3080-6
Wei Zhong, Ke Xu, Xin Li, Guoliang Tao, Toshiharu Kagawa: Study on the basic characteristics of a contactless air film conveyor using viscous traction. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210) 01/2016; 230(9). DOI:10.1177/1350650116629905
2015年
Wei Zhong, Xin Li, Guoliang Tao, Toshiharu Kagawa: Measurement and Determination of Friction Characteristic of Air Flow through Porous Media. Metals - Open Access Metallurgy Journal 03/2015; 5(1). DOI:10.3390/met5010336
2014年
Li Xin, Wei Zhong, Toshiharu Kagawa, Hao Liu, Guoliang Tao: Development of a Pneumatic Sucker for Gripping Workpieces With Rough Surface. IEEE Transactions on Automation Science and Engineering 10/2014; 13(2). DOI:10.1109/TASE.2014.2361251
P.-F. Qian, G.-L. Tao, D.-Y. Meng, W. Zhong, W. Ban, X. Zhu: Sliding mode trajectory tracking control of electro-pneumatic clutch actuator. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 06/2014; 48(6). DOI:10.3785/j.issn.1008-973X.2014.06.019
Wei Zhong, Xin Li, Fanghua Liu, Guoliang Tao, Bo Lu, Toshiharu Kagawa: Measurement and Correlation of Pressure Drop Characteristics for Air Flow Through Sintered Metal Porous Media. Transport in Porous Media 01/2014; 101(1). DOI:10.1007/s11242-013-0230-2
2013年
Wei Zhong, Xin Li, Fanghua Liu, Daohua Lu, Guoliang Tao, Toshiharu Kagawa: Modelling and experimental validation of dynamic characteristics of porous-walled air film for non-contact conveyor system. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210) 07/2013; 227(7). DOI:10.1177/1350650112466619
Q. Liu, G.-L. Tao, W. Zhong, W. Ban: Development of in-out-burst pneumatic on/off valve. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 05/2013; 47(5). DOI:10.3785/j.issn.1008-973X.2013.05.008
P.-F. Qian, G.-L. Tao, H. Liu, B. Lu, W. Zhong: Stick-slip characteristics of pneumatic cylinder based on meter-in circuit.
2012年以前
W. Zhong, H. Liu, G.-L. Tao, X. Li, T. Kagawa: Theoretical and experimental study on pressure characteristics of air film for levitation using porous media. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 04/2012; 46(4). DOI:10.3785/j.issn.1008-973X.2012.04.007
Feng Zhang, Hao Liu, Guo Liang Tao, Wei Zhong: Design, Modeling and Simulation of an Innovation Pneumatic High Speed on-Off Valve Based on Giant Magnetostrictive Material. 12/2011; 422. DOI:10.4028/www.scientific.net/AMR.422.243
Wei Zhong, Guoliang Tao, Xin Li, Kenji Kawashima, Toshiharu Kagawa: Determination of Flow Rate Characteristics of Porous Media Using Charge Method. Flow Measurement and Instrumentation 06/2011; 22(3). DOI:10.1016/j.flowmeasinst.2011.02.002
Wei Zhong, Guoliang Tao, Xin Li, Kenji Kawashima, Toshiharu Kagawa: Analysis of levitation using porous media.
W. Zhong, G. Tao, X. Li, K. Kawashima, T. Kagawa: Analysis on flow rate characteristics of porous materials.
Zhong Xiang, Hao Liu, Guo-Liang Tao, Jun Man, Wei Zhong: Development of an ε-type actuator for enhancing high-speed electro-pneumatic ejector valve performance. Journal of Zhejiang University - Science A: Applied Physics & Engineering 11/2008; 9(11). DOI:10.1631/jzus.A0820350
W. Zhong, G.-L. Tao, H. Liu, Z. Xiang: Mathematical modeling and simulation of pneumatic nail gun. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science Edition 02/2008; 42(2).
2001.09-2006.07 浙江大学 本科
2006.09-2011.12 浙江大学 博士
2008.10-2010.09 东京工业大学 访问学者
2012.01-2015.06 江苏科技大学 讲师
2015.07-至今 江苏科技大学 副教授
2016.10-至今 东京大学 访问学者
1、液压与气压传动
2、机械工程测试技术
3、机电专业英语
4、现代气动技术理论与实践（研究生）
学校地址：江苏省镇江市丹徒区长晖路666号
邮编：212100
TEL:0511-84402122
版权所有©2013-2022 江苏科技大学 苏ICP备05063164号
