头像
LIST of PUBLISHED PAPERS
Email:
Office:
Address:
PostCode:
Fax:

您是第21 Access

  • Introduction

  • Research Focus

    1.  ZANG Qian-Hao, CHEN Hong-Mei, LAN Fang-Yuan, ZHANG Jing, JIN Yun-Xue. Effect of friction stir processing on microstructure and damping capacity of AZ31 alloy. Journal of Central South University, 2017, 24: 1034−1039（Corresponding Author）（SCI 四区0.601）

    2.  Zang Qianhao, Liu Zhongming, Chen Hongmei, Zhang Jing, Jin Yunxue. Effect of Heat Treatment on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy. RARE METAL MATERIALS AND ENGINEERING. 2016, 45(6): 1578-1582（Corresponding Author）（SCI 四区0.258）

    3.  CHEN Hongmei, ZANG Qianhao, LIU Zhongming, ZHANG Jing，JIN Yunxue. Effect of T6 treatment on microstructure and mechanical properties of twin roll cast ZK30-Y magnesium alloy.Journal of Jiangsu University of Science and Technology ( Natural Science Edition). 2016, 30(3): 227-231. (in Chinese) (Prior publication)

    4.  Chen Hongmei, Liu Zhongming, Zang Qianhao, Yu Xin, Zhang Jing and Jin Yunxue. Effect of Heat Treatment on High Temperature Damping Capacity of ZK60 Sheet Produced by Twin-roll Casting and Hot-rolling. Chiang Mai Journals of Science, 2016, 43(2) : 351-357 （SCI 0.371 ）

    5.  Zhongming Liu, Hongmei Chen, Weipeng Guo, Jing Zhang and Yunxue Jin. Interface and Damping Capacity of Mg/Al Multilayered Composite Produced by Accumulative Roll Bonding. Materials Science Forum, 2016, 849: 838-843 (Corresponding Author) （EI Sited）

    6.  Chen Hongmei, Zang Qianhao, Yu Hui, Zhang Jing, Jin Yunxue. Effect of Intermediate Annealing on the Microstructure and Mechanical Property of ZK60 Magnesium Alloy Produced by Twin Roll Casting and Hot Rolling. Materials Characterization, 2015, 106: 437-441 （SCI 三区，2.714）

    7.  Hongmei Chen, Qianhao Zang, Jing Zhang, Jaehyung Cho, Yunxue Jin, and Yuke Shi. Effect of Heat Treatment on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Strip. Magnesium Technology 2015, 2015: 267-271

    8.  Chen Hongmei, Zang Qianhao, Zhang Jing, Jin Yunxue, Xiang Hongfu. Texture of TC4 Titanium Alloy Tubes Processed by Cold Rolling. Special Casting & Nonferrous Alloys. 2015, 35(10): 1012-1015. (in Chinese)

    9.  Zang Qianhao, Shi Yuke, Chen Hongmei, Zhang Jing, and Jin Yunxue, Effect of Annealing Temperature on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy, Advanced Materials Research, 2015, 1095: 87-90 (Corresponding author)

    10.  Q. H. Zang, H. M. Chen, J. Zhang, J. H. Cho, Y.X. Jin, Y.K. Shi Effect of hot rolling on microstructure and damping capacity of Twin Roll Cast ZK60 alloy, Material Research Innovation, 2015, 19(S4): S102-105. (Corresponding author) （SCI 0.411 ）

    11.  Jing Zhang, Hongmei Chen, Hui Yu and Yunxue Jin. Study on Dual Modification of Al-17%Si Alloys by Structural Heredity. Metals, 2015, 5:1112-1126. ( SCI 四区1.984 )

    12.  Hongmei Chen, Huashun Yu, Guanghui Min, Yunxue Jin, Study on the Microstructure and Texture of Warm Rolled ZK60 Magnesium Alloy Sheet, Advanced Materials Research, 2012,557-559: 1344-1348

    13.  Chen Hongmei, Yu Huashun, Kang Suk Bong, Min Guanghui, Jin Yunxue. Effect of forming process on microstructure and mechanical properties of ZK60 alloy sheet. Rare Metal Materials and Engineering, 2011, 40(10): 1708-1712. （SCI 四区 0.601）

    14.  CHEN Hong-mei, YU Hua-shun, KANG Suk-bong, Min Guang-hui, JIN Yun-xue.Effect of Rolling Temperature on Microstructure and Texture of Twin Roll Cast ZK60 Magnesium Alloy. Transactions of Nonferrous Metals Society of China, 2010, 20(11): 2086-2091. （SCI 四区，1.342）

    15.  Hongmei Chen, Huashun Yu, Suk Bong Kang, Guanghui Min. Texture development in a twin roll cast and warm rolled ZK60 magnesium alloy. In: S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, ed. Magnesium Technology 2010. Warrendale, Pennsylvania: TMS 2010:559-562

    16.  Hongmei Chen, Huashun Yu, Suk Bong Kang, Jae Hyoung Cho, Guanghui Min, Optimization of annealing treatment parameters in a twin roll cast and warm rolled ZK60 alloy sheet, Materials Science and Engineering A, 2010, 527(4-5):1236-1242. （SCI 二区，3.094）

    17.  Hongmei Chen, Huashun Yu, Suk Bong Kang, Guanghui Min, Optimization of annealing treatment parameters in a twin roll cast and warm rolled Mg-4.5Al-1.0Zn alloy, Advanced Materials Research, 79-82 (2009), 2139-2142.

    18.  Hongmei Chen, Suk Bong Kang, Huashun Yu, Jaehyung Cho, Hyoung Wook Kim, Guanghui Min. Effect of heat treatment on microstructure and mechanical properties of twin roll cast and sequential warm rolled ZK60 alloy sheets, Journal of Alloys and Compounds, 2009,476(1-2): 324-328. （SCI 二区，3.133）

    19.  Hongmei Chen, Suk Bong Kang, Huashun Yu, Hyoung Wook Kim, Guanghui Min. Microstructure and mechanical properties of Mg-4.5Al-1.0Zn alloy sheets produced by twin roll casting and sequential warm rolling. Materials Science and Engineering A, 2008, 492(1-2): 317–326. （SCI 二区，3.094）

    20.  Chen Hongmei, Suk-Bong Kang,Yu Huashun, Min Guanghui, Study on microstructure and mechnical properties of AZ451 magnesium alloy. ACTA METALLURGICA SINICA. 2008,44(4),397-402. (in Chinese)（SCI 四区，0.584）

    21.  Chen Hongmei, Suk-Bong Kang,Yu Huashun, Hyoung Wook Kim, Min Guanghui, Effects of Ca on Microstructure and Properties of AZ4151 Wrought Magnesium Alloy.SPECIAL CASTING & NONFERROUS ALLOYS. 2008, 28(3): 397-402. (in Chinese)

    22.  Chen Hongmei, Suk-Bong Kang,Yu Huashun, Min Guanghui, Effect of warm rolling on microstructure and mechanical properties of twin roll cast ZK60 Mg alloy. MATERIALS SCIENCE & TECHNOLOGY. .2008, S1:42-46. (in Chinese)

    23.  Hongmei Chen, Huashun Yu, Jing Zhang, Lin Zhang, and Guanghui Min. Microstructure and mechanical properties of Al2O3-TiC/Al in situ Composites.Key Engineering Materials, 2006, 326-328:1857-1860

    24.  Hongmei Chen, Huashun Yu, Jing Zhang, Guanghui Min. Fabrication of Al2O3-TiC/Al Composites by In-situ Reaction.SPECIAL CASTING & NONFERROUS ALLOYS. 2006, 26(10):674-675. (in Chinese)

    25.  Chen Jun，Chen Hongmei，Yu Huashun，Min Guanghui，Jin Yunxue. Microstructure and forming mechanism of twin roll cast magnesium alloy. Journal of Jiangsu University of Science and Technology( Natural Science Edition). 2011, 25(1): 35-38. (in Chinese)

    26.  Jae-Hyung Cho, Hong-Mei Chen, Shi-Hoon Choi, Hyoung-Wook Kim,Suk-Bong Kang, Aging Effect on Texture Evolution during Warm Rolling of ZK60 Alloys Fabricated by Twin-Roll Casting, Metallurgical and Materials Transactions A, 2010, 41(10): 2575-2583. （SCI 三区，1.874）

    27.  Suk Bong Kang, Hongmei Chen, Hyoung Wook Kim, Jae Hyoung Cho, Effect of Reheating and Warm Rolling on Microstructure and Mechanical Properties of Twin Roll Strip Cast Mg-4.5Al-1.0Zn-0.4Mn-0.3Ca Alloy Sheet, In: M.O. Pekguleryuz, N.R.Neelameggham, R.S.Beals, and E.A.Nyberg, ed., Magnesium Technology 2008, Warrendale, Pennsylvania: TMS, 2008:147-152

    28.  YU Huashun, CHEN Hongmei, MA Rendian, and MIN Guanghui.The fabrication of AlN-TiC/Al composites by gas injection processing. RARE METALS. 2006,25(6) :659-664. （SCI 三区，2.714）

    29.  YU Huashun, CHEN Hongmei, SUN Liming, and MIN Guanghui.Preparation of Al-Al3Ti in-situ composites by direct reaction method. RARE METALS. 2006, 25(1):32~36. （SCI 三区，2.714）

    30.  Zhang Jing, Yu Huashun, Chen Hongmei and Min Guanghui, Al-Si/Al2O3 in situ composite prepared by displacement reaction of CuO/Al system, China Foundry, 2010, 7(1): 19-23

    31.  JIN Yun-xue, LI Kai-yue, CHEN Hong-mei，XIANG Hong-fu. Effect of rolling process on microstructure and texture of cold rolled Ti-6Al-4V seamless tubes. Advanced Materials Research, 2012,557-559: 191-197


  • Education Background

  • Teaching