材料科学与工程学院
通讯地址：江苏省镇江市丹徒区长晖路666号江苏科技大学长山校区材料学院311
个人邮箱：yongzhao418@just.edu.cn
邮政编码：212003
办公地点：长山校区-材料学院311
传真：
赵勇，博士，教授，国际焊接工程师，材料科学与工程学院副院长，分管本科教学；同时担任江苏科技大学新材料及先进焊接技术研究院常务副院长，江苏省机械工程学会焊接分会常务理事、副秘书长；曾获镇江市十佳教师，江苏科技大学教学名师等荣誉称号。近5年发表英文SCI收录32篇；近五年主持并完成国家海洋防务基金、江苏省产学研合作项目，并承担了中国中车青岛四方机车车辆股份有限公司、新扬子造船有限公司、中国船舶重工集团公司第702研究所等多家企业委托的科研项目，近5年科研到款850余万元。主持并完成江苏省及校教改项目各1项，负责江苏省在线开放课程1门，指导本科毕业设计省优7次，江苏省微课比赛二等奖，江苏科技大学讲课比赛二等奖2次，江苏科技大学微课比赛一等奖。
1）激光焊接，包括金属材料的激光自熔焊、激光-电弧复合焊接、激光填丝焊等；
2）材料焊接性分析，包括合金钢、不锈钢、铝合金、钛合金等金属材料的焊接材料匹配、焊接方法的选择和焊接工艺优化、焊接接头的组织性能分析。
论文题目 | 期刊 | 年，卷，期，页码 | 作者 | 档次 | |
1 | Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding | Materials and Design Mater. Des. | 56 (2014) 725–730 | 赵勇*，王清曌， 陈华斌，严铿 | SCI 二区IF=3.171 ESI期刊 |
2 | Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding | Materials and Design Mater. Des. | 57 (2014) 146–155 | 赵勇*，周礼龙，王清曌，严铿，邹家生 | SCI 二区IF=3.171 ESI期刊 |
3 | Microstructure and Mechanical Properties of Friction Stir- Welded Mg-2Nd-0.3Zn-0.4Zr Magnesium Alloy | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | (2014)23:4136–4142 | 赵勇，王清曌，何旭丹，黄坚*，严铿，董洁 | SCI 四区IF=0.981 ESI期刊K |
4 | Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys | Materials and Design Mater. Des. | 65 (2015) 675–681 | 赵勇，陆正萍，严铿*，黄林召 | SCI 二区IF=3.171 ESI期刊 |
5 | Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | (2015)78:1437-1443 | 赵勇，黄小鲁，李启明，黄坚（通讯作者），严铿 | SCI 四区IF=1.458 ESI期刊 |
6 | Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding | Materials and Design Mater. Des. | 68 (2015) 97–103 | 王清曌，赵勇*（通讯作者），严铿，芦笙 | SCI 二区IF=3.171 ESI期刊 |
7 | 50 mm 转子钢超窄间隙激光填丝焊接头组织与性能 | 中国激光 | 2015,42(2):117-123 | 赵勇，王清曌，黄坚*，吴毅雄 | EI收录 |
8 | Ultra-narrow-gap multi-pass welding of 70 mm thick steel plates using a high power CO2 laser | 7th Asia Pacific IIW International Congress | 8 July 2013 | 赵勇，黄坚，吴毅雄 | 国际会议 |
9 | Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | 2016,83(1): 673-679 | 赵勇，蒋圣，杨少峰，陆正萍，严铿（通讯作者） | SCI 四区IF=1.458 ESI期刊 |
10 | The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint | Materials and Design Mater. Des. | 88（2015）1366-1376 | 王清曌，赵志霞，赵勇（通讯作者），严铿，张豪 | SCI 二区IF=3.171 ESI期刊 |
11 | Effect of travel speed on the microstructure of Al-to-Mg FSW joints | Materials Science and Technology Mater. Sci. Technol. | 2016,32(10):1025-1034 | 赵勇，黄林召，赵志霞，严铿（通讯作者） | SCI 四区IF=1.008 ESI期刊 |
12 | The strengthening mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding-2016 | Materials and Design Mater. Des. | 102 (2016) 91-99 | 王清曌，赵志霞，赵勇（通讯作者），严铿，刘川，张豪 | SCI 二区IF=3.997 ESI期刊 |
13 | Plasma behavior and control with small diameter assisting gas nozzle during CO2 laser welding | Journal of Materials Processing Technology J MATER PROCESS TECH | 237 (2016) 208–215 | 赵勇，朱凯立，马秋杰，尚青，黄坚，杨东杰 | SCI 三区IF=2.359 ESI期刊 |
13# | Improvement in Joint Strength of Spray-Deposited Al-Zn- Mg-Cu Alloy in Underwater Friction Stir Welding by Altered Temperature of Cooling Water | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | (2016) 25:5486–5493 | 梁海梅，严铿（通讯作者），王清曌，赵勇，刘川，张豪 | SCI 四区IF=0.981 ESI期刊 |
14 | Droplet transfer and weld geometry in laser welding with filling wire | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | (2017) 90:2153–2161 | 赵勇，杨千里，黄坚（通讯作者），邹家生，吴毅雄 | SCI 三区IF=1.568 ESI期刊 |
15 | Microstructure and mechanical properties of the laser-welded Mg-3Nd-0.2Zn-0.4Zr (NZ30K) magnesium alloy | Optics and Laser Technology | 93 (2017) 109–117 | 严铿，苏金松，赵勇（通讯作者） | SCI 三区IF=1.879 ESI期刊 |
16 | Narrow-gap laser welding using filler wire of thick steel plates | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | 2017 2017 (1) :1-8 | 赵勇，马生翀，黄坚（通讯作者），吴毅雄 | SCI 三区IF=1.568 ESI期刊 |
17 | The effect of laser surface melting on microstructure and corrosion behavior of friction stir welded aluminum alloy 2219 | Optics and Laser Technology | 2017 2017, 96 :299-306 | 马生翀，赵勇（通讯作者），邹家生，严铿，刘川 | SCI 三区IF=1.879 ESI期刊 |
18 | Effects of Overlapping Distances on Steel Microstructure and Properties After Multi-track Laser Quenching | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | December 2017, Volume 26, Issue 12, pp 5973–5982 | Yong Zhao, Chen Chen, Keng Yan, Jiasheng Zou, Chuan Liu | SCI 四区IF=0.981 ESI期刊 |
19 | Effect of Exchanging Advancing and Retreating Side Materials on Mechanical Properties and Electrochemical Corrosion Resistance of Dissimilar 6013-T4 and 7003 Aluminum Alloys FSW Joints | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | 2018（27）：1777-1783 | 赵志霞，梁海梅，赵勇（通讯作者），严铿 | SCI 四区IF=0.981 ESI期刊 |
20 | Effects of helium gas flow rate on arc shape, molten pool behavior and penetration in aluminum alloy DCEN TIG welding | Journal of Materials Processing Technology J MATER PROCESS TECH | 2018（255）：696-702 | 陈晨，魏新乾，赵勇，严铿（通讯作者），贾占君，贺宇翔 | SCI 二区IF=2.359 ESI期刊 |
21 | Microstructure and properties of Cu/Ti laser welded joints | Journal of Materials Processing Technology J MATER PROCESS TECH | 2018（257）：244-249 | 赵勇，王伟宇，严铿（通讯作者），刘川，邹家生 | SCI 二区IF=2.359 ESI期刊 |
22 | Effect of shielding gas on the metal transfer and weld morphology in pulsed current MAG welding of carbon steel | Journal of Materials Processing Technology | 2018（262）：382-391 | 赵勇，侍孝建，严铿（通讯作者），王国强，贾占君，贺宇翔 | SCI 二区IF=2.359 ESI期刊 |
23 | Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | 2018（27）:5803–5814 | SCI 四区IF=0.981 ESI期刊 | |
24 | Microstructure and Mechanical Properties of a 10CrNi3MoV Thick Plate Welded Joint Using Narrow Gap Laser Welding with Filler Wire | Lasers in Engineering Lasers in Eng. | 2018（41）：57-72 | 赵勇，苏峰，黄坚（通讯作者），邹家生，吴毅雄 | SCI 四区IF=0.153 |
25 | Effect of welding speed on performance of friction stir welded spray forming 7055 aluminum alloy | Journal of Manufacturing Processes | 2019（46）：304-316 | 马生翀，赵勇（通讯作者），濮继宏，赵志霞，刘川，严铿 | SCI 三区IF=3.462 |
26 |
论文题目 | 期刊 | 年，卷，期，页码 | 作者 | 档次 | |
1 | Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding | Materials and Design Mater. Des. | 56 (2014) 725–730 | 赵勇*，王清曌， 陈华斌，严铿 | SCI 二区IF=3.171 ESI期刊 |
2 | Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding | Materials and Design Mater. Des. | 57 (2014) 146–155 | 赵勇*，周礼龙，王清曌，严铿，邹家生 | SCI 二区IF=3.171 ESI期刊 |
3 | Microstructure and Mechanical Properties of Friction Stir- Welded Mg-2Nd-0.3Zn-0.4Zr Magnesium Alloy | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | (2014)23:4136–4142 | 赵勇，王清曌，何旭丹，黄坚*，严铿，董洁 | SCI 四区IF=0.981 ESI期刊K |
4 | Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys | Materials and Design Mater. Des. | 65 (2015) 675–681 | 赵勇，陆正萍，严铿*，黄林召 | SCI 二区IF=3.171 ESI期刊 |
5 | Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | (2015)78:1437-1443 | 赵勇，黄小鲁，李启明，黄坚（通讯作者），严铿 | SCI 四区IF=1.458 ESI期刊 |
6 | Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding | Materials and Design Mater. Des. | 68 (2015) 97–103 | 王清曌，赵勇*（通讯作者），严铿，芦笙 | SCI 二区IF=3.171 ESI期刊 |
7 | 50 mm 转子钢超窄间隙激光填丝焊接头组织与性能 | 中国激光 | 2015,42(2):117-123 | 赵勇，王清曌，黄坚*，吴毅雄 | EI收录 |
8 | Ultra-narrow-gap multi-pass welding of 70 mm thick steel plates using a high power CO2 laser | 7th Asia Pacific IIW International Congress | 8 July 2013 | 赵勇，黄坚，吴毅雄 | 国际会议 |
9 | Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | 2016,83(1): 673-679 | 赵勇，蒋圣，杨少峰，陆正萍，严铿（通讯作者） | SCI 四区IF=1.458 ESI期刊 |
10 | The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint | Materials and Design Mater. Des. | 88（2015）1366-1376 | 王清曌，赵志霞，赵勇（通讯作者），严铿，张豪 | SCI 二区IF=3.171 ESI期刊 |
11 | Effect of travel speed on the microstructure of Al-to-Mg FSW joints | Materials Science and Technology Mater. Sci. Technol. | 2016,32(10):1025-1034 | 赵勇，黄林召，赵志霞，严铿（通讯作者） | SCI 四区IF=1.008 ESI期刊 |
12 | The strengthening mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding-2016 | Materials and Design Mater. Des. | 102 (2016) 91-99 | 王清曌，赵志霞，赵勇（通讯作者），严铿，刘川，张豪 | SCI 二区IF=3.997 ESI期刊 |
13 | Plasma behavior and control with small diameter assisting gas nozzle during CO2 laser welding | Journal of Materials Processing Technology J MATER PROCESS TECH | 237 (2016) 208–215 | 赵勇，朱凯立，马秋杰，尚青，黄坚，杨东杰 | SCI 三区IF=2.359 ESI期刊 |
13# | Improvement in Joint Strength of Spray-Deposited Al-Zn- Mg-Cu Alloy in Underwater Friction Stir Welding by Altered Temperature of Cooling Water | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | (2016) 25:5486–5493 | 梁海梅，严铿（通讯作者），王清曌，赵勇，刘川，张豪 | SCI 四区IF=0.981 ESI期刊 |
14 | Droplet transfer and weld geometry in laser welding with filling wire | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | (2017) 90:2153–2161 | 赵勇，杨千里，黄坚（通讯作者），邹家生，吴毅雄 | SCI 三区IF=1.568 ESI期刊 |
15 | Microstructure and mechanical properties of the laser-welded Mg-3Nd-0.2Zn-0.4Zr (NZ30K) magnesium alloy | Optics and Laser Technology | 93 (2017) 109–117 | 严铿，苏金松，赵勇（通讯作者） | SCI 三区IF=1.879 ESI期刊 |
16 | Narrow-gap laser welding using filler wire of thick steel plates | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | 2017 2017 (1) :1-8 | 赵勇，马生翀，黄坚（通讯作者），吴毅雄 | SCI 三区IF=1.568 ESI期刊 |
17 | The effect of laser surface melting on microstructure and corrosion behavior of friction stir welded aluminum alloy 2219 | Optics and Laser Technology | 2017 2017, 96 :299-306 | 马生翀，赵勇（通讯作者），邹家生，严铿，刘川 | SCI 三区IF=1.879 ESI期刊 |
18 | Effects of Overlapping Distances on Steel Microstructure and Properties After Multi-track Laser Quenching | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | December 2017, Volume 26, Issue 12, pp 5973–5982 | Yong Zhao, Chen Chen, Keng Yan, Jiasheng Zou, Chuan Liu | SCI 四区IF=0.981 ESI期刊 |
19 | Effect of Exchanging Advancing and Retreating Side Materials on Mechanical Properties and Electrochemical Corrosion Resistance of Dissimilar 6013-T4 and 7003 Aluminum Alloys FSW Joints | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | 2018（27）：1777-1783 | 赵志霞，梁海梅，赵勇（通讯作者），严铿 | SCI 四区IF=0.981 ESI期刊 |
20 | Effects of helium gas flow rate on arc shape, molten pool behavior and penetration in aluminum alloy DCEN TIG welding | Journal of Materials Processing Technology J MATER PROCESS TECH | 2018（255）：696-702 | 陈晨，魏新乾，赵勇，严铿（通讯作者），贾占君，贺宇翔 | SCI 二区IF=2.359 ESI期刊 |
21 | Microstructure and properties of Cu/Ti laser welded joints | Journal of Materials Processing Technology J MATER PROCESS TECH | 2018（257）：244-249 | 赵勇，王伟宇，严铿（通讯作者），刘川，邹家生 | SCI 二区IF=2.359 ESI期刊 |
22 | Effect of shielding gas on the metal transfer and weld morphology in pulsed current MAG welding of carbon steel | Journal of Materials Processing Technology | 2018（262）：382-391 | 赵勇，侍孝建，严铿（通讯作者），王国强，贾占君，贺宇翔 | SCI 二区IF=2.359 ESI期刊 |
23 | Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | 2018（27）:5803–5814 | SCI 四区IF=0.981 ESI期刊 | |
24 | Microstructure and Mechanical Properties of a 10CrNi3MoV Thick Plate Welded Joint Using Narrow Gap Laser Welding with Filler Wire | Lasers in Engineering Lasers in Eng. | 2018（41）：57-72 | 赵勇，苏峰，黄坚（通讯作者），邹家生，吴毅雄 | SCI 四区IF=0.153 |
25 | Effect of welding speed on performance of friction stir welded spray forming 7055 aluminum alloy | Journal of Manufacturing Processes | 2019（46）：304-316 | 马生翀，赵勇（通讯作者），濮继宏，赵志霞，刘川，严铿 | SCI 三区IF=3.462 |
26 |
论文题目 | 期刊 | 年，卷，期，页码 | 作者 | 档次 | |
1 | Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding | Materials and Design Mater. Des. | 56 (2014) 725–730 | 赵勇*，王清曌， 陈华斌，严铿 | SCI 二区IF=3.171 ESI期刊 |
2 | Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding | Materials and Design Mater. Des. | 57 (2014) 146–155 | 赵勇*，周礼龙，王清曌，严铿，邹家生 | SCI 二区IF=3.171 ESI期刊 |
3 | Microstructure and Mechanical Properties of Friction Stir- Welded Mg-2Nd-0.3Zn-0.4Zr Magnesium Alloy | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | (2014)23:4136–4142 | 赵勇，王清曌，何旭丹，黄坚*，严铿，董洁 | SCI 四区IF=0.981 ESI期刊K |
4 | Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys | Materials and Design Mater. Des. | 65 (2015) 675–681 | 赵勇，陆正萍，严铿*，黄林召 | SCI 二区IF=3.171 ESI期刊 |
5 | Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | (2015)78:1437-1443 | 赵勇，黄小鲁，李启明，黄坚（通讯作者），严铿 | SCI 四区IF=1.458 ESI期刊 |
6 | Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding | Materials and Design Mater. Des. | 68 (2015) 97–103 | 王清曌，赵勇*（通讯作者），严铿，芦笙 | SCI 二区IF=3.171 ESI期刊 |
7 | 50 mm 转子钢超窄间隙激光填丝焊接头组织与性能 | 中国激光 | 2015,42(2):117-123 | 赵勇，王清曌，黄坚*，吴毅雄 | EI收录 |
8 | Ultra-narrow-gap multi-pass welding of 70 mm thick steel plates using a high power CO2 laser | 7th Asia Pacific IIW International Congress | 8 July 2013 | 赵勇，黄坚，吴毅雄 | 国际会议 |
9 | Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | 2016,83(1): 673-679 | 赵勇，蒋圣，杨少峰，陆正萍，严铿（通讯作者） | SCI 四区IF=1.458 ESI期刊 |
10 | The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint | Materials and Design Mater. Des. | 88（2015）1366-1376 | 王清曌，赵志霞，赵勇（通讯作者），严铿，张豪 | SCI 二区IF=3.171 ESI期刊 |
11 | Effect of travel speed on the microstructure of Al-to-Mg FSW joints | Materials Science and Technology Mater. Sci. Technol. | 2016,32(10):1025-1034 | 赵勇，黄林召，赵志霞，严铿（通讯作者） | SCI 四区IF=1.008 ESI期刊 |
12 | The strengthening mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding-2016 | Materials and Design Mater. Des. | 102 (2016) 91-99 | 王清曌，赵志霞，赵勇（通讯作者），严铿，刘川，张豪 | SCI 二区IF=3.997 ESI期刊 |
13 | Plasma behavior and control with small diameter assisting gas nozzle during CO2 laser welding | Journal of Materials Processing Technology J MATER PROCESS TECH | 237 (2016) 208–215 | 赵勇，朱凯立，马秋杰，尚青，黄坚，杨东杰 | SCI 三区IF=2.359 ESI期刊 |
13# | Improvement in Joint Strength of Spray-Deposited Al-Zn- Mg-Cu Alloy in Underwater Friction Stir Welding by Altered Temperature of Cooling Water | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | (2016) 25:5486–5493 | 梁海梅，严铿（通讯作者），王清曌，赵勇，刘川，张豪 | SCI 四区IF=0.981 ESI期刊 |
14 | Droplet transfer and weld geometry in laser welding with filling wire | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | (2017) 90:2153–2161 | 赵勇，杨千里，黄坚（通讯作者），邹家生，吴毅雄 | SCI 三区IF=1.568 ESI期刊 |
15 | Microstructure and mechanical properties of the laser-welded Mg-3Nd-0.2Zn-0.4Zr (NZ30K) magnesium alloy | Optics and Laser Technology | 93 (2017) 109–117 | 严铿，苏金松，赵勇（通讯作者） | SCI 三区IF=1.879 ESI期刊 |
16 | Narrow-gap laser welding using filler wire of thick steel plates | International journal of advanced manufacturing technology Int.J.Adv. Manuf. Technol. | 2017 2017 (1) :1-8 | 赵勇，马生翀，黄坚（通讯作者），吴毅雄 | SCI 三区IF=1.568 ESI期刊 |
17 | The effect of laser surface melting on microstructure and corrosion behavior of friction stir welded aluminum alloy 2219 | Optics and Laser Technology | 2017 2017, 96 :299-306 | 马生翀，赵勇（通讯作者），邹家生，严铿，刘川 | SCI 三区IF=1.879 ESI期刊 |
18 | Effects of Overlapping Distances on Steel Microstructure and Properties After Multi-track Laser Quenching | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | December 2017, Volume 26, Issue 12, pp 5973–5982 | Yong Zhao, Chen Chen, Keng Yan, Jiasheng Zou, Chuan Liu | SCI 四区IF=0.981 ESI期刊 |
19 | Effect of Exchanging Advancing and Retreating Side Materials on Mechanical Properties and Electrochemical Corrosion Resistance of Dissimilar 6013-T4 and 7003 Aluminum Alloys FSW Joints | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | 2018（27）：1777-1783 | 赵志霞，梁海梅，赵勇（通讯作者），严铿 | SCI 四区IF=0.981 ESI期刊 |
20 | Effects of helium gas flow rate on arc shape, molten pool behavior and penetration in aluminum alloy DCEN TIG welding | Journal of Materials Processing Technology J MATER PROCESS TECH | 2018（255）：696-702 | 陈晨，魏新乾，赵勇，严铿（通讯作者），贾占君，贺宇翔 | SCI 二区IF=2.359 ESI期刊 |
21 | Microstructure and properties of Cu/Ti laser welded joints | Journal of Materials Processing Technology J MATER PROCESS TECH | 2018（257）：244-249 | 赵勇，王伟宇，严铿（通讯作者），刘川，邹家生 | SCI 二区IF=2.359 ESI期刊 |
22 | Effect of shielding gas on the metal transfer and weld morphology in pulsed current MAG welding of carbon steel | Journal of Materials Processing Technology | 2018（262）：382-391 | 赵勇，侍孝建，严铿（通讯作者），王国强，贾占君，贺宇翔 | SCI 二区IF=2.359 ESI期刊 |
23 | Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding | Journal of Materials Engineering and Performance J. Mater. Eng. Perform. | 2018（27）:5803–5814 | SCI 四区IF=0.981 ESI期刊 | |
24 | Microstructure and Mechanical Properties of a 10CrNi3MoV Thick Plate Welded Joint Using Narrow Gap Laser Welding with Filler Wire | Lasers in Engineering Lasers in Eng. | 2018（41）：57-72 | 赵勇，苏峰，黄坚（通讯作者），邹家生，吴毅雄 | SCI 四区IF=0.153 |
25 | Effect of welding speed on performance of friction stir welded spray forming 7055 aluminum alloy | Journal of Manufacturing Processes | 2019（46）：304-316 | 马生翀，赵勇（通讯作者），濮继宏，赵志霞，刘川，严铿 | SCI 三区IF=3.462 |
26 |
1）本科生课程：材料连接原理；
2）硕士研究生课程：高等焊接冶金。
学校地址：江苏省镇江市丹徒区长晖路666号
邮编：212100
TEL:0511-84402122
版权所有©2013-2022 江苏科技大学 苏ICP备05063164号
