头像
发表论文情况
Email:
Office:
Address:
PostCode:
Fax:

您是第15 Access

  • Introduction

  • Research Focus

    发表论文：

    1.Zhiying Sun, Mingting Shen, Zhengxian Shi, Huiming Cheng.Infuence of unidirectional loading pusher head structure on the deformation law of bionic egg-shaped shells in internal high pressure bulging[J]. International journal of advanced manufacturing technology,2024:5219-5232.(SCI IF:0.67, 3区)

    2. Shi, Zhengxian, Sun Zhiying  et al., Study on the mechanism of unidirectional loading rubber bulging of bionic egg-shaped shell. International journal of advanced manufacturing technology, 2023. 125(7-8):3633-3649.(SCI IF:0.67, 3区)

    3.Huang, Jiadong, Sun Zhiying et al., Research on the deformation mechanism of egg-shaped shells in granular medium bulging. International journal of advanced manufacturing technology, 2023. 124(1-2):497-509.(SCI IF:0.67, 3区)

    4.Sun, Zhiying and F. Ye, Study on conveying force area of cone-shaped parts in multi-pass hydroforming. Journal of the Chinese Institute of Engineers, 2020. 43(8):  775-784.

    5.Sun, Zhiying and H. Zhuang, Experimental study on forming limit diagram obtained by bulging uniformly in thickness direction. The International Journal of Advanced Manufacturing Technology, 2019. 104(1): 967-977.

    6.Sun,  Zhiying, et al., Study on the mechanism and the suppression method of wrinkling in side wall using hydroforming of the fairing. The International Journal of Advanced Manufacturing Technology, 2017. 90(9-12): 2527-2535.

    7.Sun Zhiying, L.L., Study on Hydroforming Process and Springback Control of Large Sheet with Weak Rigidity. International Journal of Precision Engineering and Manufacturing., 2017.18(6):903-912.

    8.Sun,  Zhiying and L. Lang, Effect of stress distribution on springback in hydroforming process. The International Journal of Advanced Manufacturing Technology, 2017. 93(5): 2773-2782.

    9.孙志莹,施正贤, 申明廷. 基于颗粒介质胀形的仿生蛋形壳体质量研究[J]. 锻压技术.2023.48(5):176-182.

    10. 孙志莹, 施正贤, 申明廷 .基于响应面法的柱形壳内高压胀形工艺优化[J]. 锻压技术.2023.48(10):95-101

    11.郎利辉,孙志莹,王耀. 汽车大型铝合金覆盖件的充液成形技术. 锻压技术, 2017. 42(08): 22-27.

    12.孙志莹, 郎利辉,孔德帅. 铝合金马鞍形件充液成形工艺模拟分析. 精密成形工程, 2015. 7(01): 46-50.

    13.郎利辉,孙志莹,孔德帅,王永铭.复杂薄壁航空整体钣金件的液压成形技术. 锻压技术, 2014. 39(10): 25-31.

    14.李荣, 孙志莹,郎利辉, 机身大型蒙皮件拉形新工艺可行性研究. 锻压技术, 2014. 39(10): 47-51.


  • Education Background

  • Teaching