学术论文

[1]2014-Zhou H, Jing X, Wang L, Dai K, Yongpeng J. Research on High Speed Cutting Parameter Optimization and Fault Diagnosis Technology. Advances in Mechanical Engineering.2014;6.

[2]2014-周宏根,王梦莹,景旭文,贾永鹏.面向多学科优化的柴油机本体建模与应用[J].计算机集成制造系统,2014,20(10):2348-2359.

[3]2018-Honggen Z ,Shan L ,Guochao L , et al. Machining Stress Analysis and Deformation Prediction of Connecting Rod Based on FEM and GRNN[J]. Iranian Journal of Science & Technology Transactions of Mechanical Engineering,2018.

[4]2018-周宏根,黄剑雄,刘金锋,田桂中,李磊,李国超.面向柴油机箱体曲轴孔系去除体构建方法[J].计算机集成制造系统,2018,24(06):1418-1426.

[5]2018-Honggen Z ,Chuhui W ,Xuwen J , et al. Influence of cutting and clamping forces on machining distortion of diesel engine connecting rod[J]. The International Journal of Advanced Manufacturing Technology, 2018, 99:897-910.

[6]2020-Zhou, H, Wang, Z, Liu, J, Tian, G, Jing, X, Li, L. Research on block storage yard scheduling according to grid method. Concurrency Computat Pract Exper. 2020; 32:e5576.

[7]2020-Zhou H, Cui J, Tian G, Zhu Y, Jia C. Modeling technology of curved surface development for puffer fish. Advances in Mechanical Engineering. 2020;12(4).

[8]2020-周宏根,崔杰,田桂中,朱烨圣,贾长峰.河鲀背部形貌曲面拟合及数学建模[J].吉林大学学报(工学版),2020,50(03):1131-1137.

[9]2020-Zhou H, Liu C, Tian G, Feng X, Jia C. Research on the drag reduction property of puffer (Takifugu flavidus) spinal nonsmooth structure surface. Microsc Res Tech. 2020, 83(7):795-803.

[10]2020-Zhou, H., Zhao, D., Liu, Y. et al. Influence of Induction Hardening Process on Camshafts’ Residual Stresses. Arab J Sci Eng 2020, 45, 9651–9659.

[11]2021-Honggen Zhou, Shen, Di; Tian, Guizhong; Cui, Jie; Jia, Changfeng. Biomechanical characteristics of puffer skin for flexible surface drag reduction, Mechanics of Advanced Materials and Structures, 2021, 28,1194-1200.

[12]2021-Zhou, H., Zhu, Y., Tian, G. et al. Experimental Investigations of the Turbulent Boundary Layer for Biomimetic Surface with Spine-Covered Protrusion Inspired by Pufferfish Skin. Arab J Sci Eng 2021, 46, 2865–2875

[13]2021-Zhou, H., Sheng, S., Liu, J. et al. Research on intelligent generation method of process dimension based on feature constraint. Int J Adv Manuf Technol,2021, 116, 1003–1021

[14]2021-Cai, Y., Zhou, H.(通讯), Liu, J., Yuan, X., Zhu, T., Zou, S., Wen, X., Du, C., & Zhou, D. Research on path generation and stability control method for UAV-based intelligent spray painting of ships. Journal of Field Robotics, 2022, 39, 188– 202.

[15]2021-Zhou H ,Yang W ,Sun L , et al. Reliability optimization of process parameters for marine diesel engine block hole system machining using improved PSO.[J]. Nature Publishing Group, 2021(1).

[16]2022-Liu Y ,Zhou H.(通讯),Zhao D , et al. Online approach to measuring relative location of spatial geometric features of long rotating parts[J]. Measurement, 2022, 187:110317-.

[17]2022-Zhou, H., Chen, J., Bai, X., Li, G., Guan, X., Du, Q., Li, N. and Jing, X. Effect of grinding depth on the rotating bending fatigue properties of 40Cr steel. Fatigue Fract Eng Mater Struct, 2022, 45: 1292-1295.

[18]2022-Zhou H, Wang Z, Li L, Xu B. Line heating process parameter forecasting method based on optimization concept. Advances in Mechanical Engineering. 2022;14(3).

[19]2022-周宏根, 魏凯, 窦振寰,等. 基于数字孪生的船用柴油机整机性能评估方法[J]. 船舶工程, 2022(005):044.

[20]2023-Honggen Zhou; Xiaodie Ren; Li Sun; Guochao Li; Yinfei Liu, Remaining Useful Life Prediction Method for Rolling Bearings Based on CBAM-CNN-BiLSTM. 2023 IEEE 12th Data Driven Control and Learning Systems Conference. (会议论文，EI检索)

[21]2023- Honggen Zhou, Shangshang Gao, et al. Multi-condition wear prediction and assessment of milling cutters based on linear discriminant analysis and ensemble methods. Measurement, 2023，216，112900.

[22]2023-Honggen Zhou, Baojiang Dong, Guochao Li, Leyi Zhang, Yanling Fu, Qiulin Hou, Li Sun. On-machine measurement method of hole parallelism error based on multi-sensor fusion. Measurement Science and Technology, 2023-12-27, DOI: 10.1088/1361-6501/ad1479

[23]2023-Zhou, H., Peng, Z., Li, G. et al. A Novel Built-Up Constitutive Model of 40Cr Alloy Steel Considering the Geometric Effect with Simulation Verification. J. of Materi Eng and Perform (2023). https://doi.org/10.1007/s11665-023-09021-x

[24]2023-Zhou, H., Peng, Z., Li, G. et al. A novel genetic-based residual stress and deformation prediction method for the coupled machining process of connecting rod. Int J Adv Manuf Technol (2023). https://doi.org/10.1007/s00170-023-12835-7

[25]2024-Zhicheng Peng, Honggen Zhou, Guochao Li, Leyi Zhang, Tao Zhou, Yanling Fu, A detected-data-enhanced FEM for residual stress reconstruction and machining deformation prediction, Alexandria Engineering Journal,91,2024, 334-347.