1.Zang Q, Chen H, Zhang J, et al. Microstructure, mechanical properties and corrosion resistance of AZ31/GNPs composites prepared by friction stir processing, Journal of Materials Research and Technology, 2021, 14: 195-201. (SCI, IF=5.039)

2.Zang Q, Feng D, Lee Y S, et al. Microstructure and mechanical properties of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy strip fabricated by twin roll casting and hot rolling, Journal of Alloys and Compounds, 2020, 847: 156481. (SCI, IF=5.316)

3.Zang Q, Chen H, Lee Y S, et al. Improvement of anisotropic tensile properties of Al-7.9Zn-2.7Mg-2.0Cu alloy sheets by particle stimulated nucleation, Journal of Alloys and Compounds, 2020, 828: 154330. (SCI, IF=5.316)

4.Zang Q, Yu H, Lee Y S, et al. Hot deformation behavior and microstructure evolution of annealed Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy. Journal of Alloys and Compounds, 2018, 763: 25-33. (SCI, IF=5.316)

5.Zang Q, Yu H, Lee Y S, et al. Effects of initial microstructure on hot deformation behavior of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy. Materials Characterization, 2019, 151: 404-413. (SCI, IF=4.342)

6.Zang Q, Li X, Chen H, et al.Microstructure and Mechanical Properties of AZ31/ZrO₂ Composites Prepared by Friction Stir Processing With High Rotation Speed. Frontiers in Materials, 2020, 7: 278. (SCI)

7.Zang Q, Chen H, Lan F, et al. Effect of friction stir processing on microstructure and damping capacity of AZ31 alloy. Journal of Central South University, 2017, 24(5): 1034-1039. (SCI)

8.臧千昊, 刘忠明, 陈洪美, 等. 热处理对双辊铸轧 ZK60 镁合金组织及阻尼性能的影响. 稀有金属材料与工程, 2016, 45(6): 1578-1582. (SCI)

9.Zang Q, Chen H, Zhang J, et al. Effect of hot rolling on microstructure and damping capacity of Twin Roll Cast ZK60 alloy. Materials Research Innovations, 2015, 19: 102-105. (SCI)