一作及通讯作者发表SCI/EI收录论文清单

2020年

[36] Liu Chuan, Wang Jianfei, Wang Shuang, et al. Experimental investigation on residual stress di35stribution in an engineering-scale pipe girth weld[J]. Science and Technology of Welding and Joining, 2020, Accepted. DOI: 10.1080/13621718.2020.1826694. (SCI二区，IF 3.422)

[35] Liu Chuan, Lin Changhua, Wang Jianfei, et al. Residual stress distributions in thick specimens excavated from a large circular wire+arc additive manufacturing mockup[J]. Journal of ManufacturingProcesses, 2020, 56(Part A): 474-481. (SCI二区，IF 4.086)

[34] 刘川，沈嘉斌，陈东俊，等．大厚板内部焊接残余应力分布实验研究[J]．船舶力学，2020，24(4)：484-491．(EI)

(Liu Chuan, Shen Jia-bin, Chen Dong-jun, et al. Measurement of internal welding residual stress distributions in a thick welded plate[J]. Journal of Ship Mechanics, 2020, 24(4): 484-491.)

[33] Liu Chuan, Shen Jiabin, Yan Jialing, et al. Experimental investigations on welding stress distribution in thick specimens after postweld heat treatment and ultrasonic impact treatment[J]. Journal of Materials Engineering and Performance, 2020, 29(3): 1820-1829. (SCI三区，IF 1.652）

2019年

[32] 严益，晏嘉陵，刘明星，李丹，刘川*，褚巧玲．多次切割轮廓法测试局部补焊厚板内部残余应力分布[J]．机械工程学报，2019，55(18)：28-35．(通讯作者，EI)

(Yan Yi, Yan Jialing, Liu Minxing, Li Dan, Liu Chuan*, Chu Qiaoling. Measurement on the internal stress distribution in a thick specimen with a patrial repair weld using mutiple-cut contour method[J]. Journal of MechanicaL Engineering. 2019, 55(18): 28-35.)

[31] 严益，刘川*，王春景，沈嘉斌．基于本征应变法修正厚板轮廓法应力测试误差[J]．焊接学报，2019，40(11)：82-86. (EI，通讯作者)

(Yan Yi, Liu Chuan*, Wang Chunjing, et al. Surface stress correction of the thick welded plate measured by contour method using eigenstrain method[J]. Transactions of the China Welding Institution. 2019, 40(11): 82-86.)

[30] Yan Yi, Liu Chuan*, Wang Chunjing, et al. Mechanical properties and stress variations in multipass welded joint of low-alloy high-strength steel after layer-by-layer ultrasonic impact treatment[J]. Journal of Materials Engineering and Performance, 2019, 28(5): 2726-2735. (SCI三区，IF 1.652，他引1次，通讯作者)

[29] Liu Chuan, Yan Yi, Cheng Xiaohua, et al. Residual stress in a restrained specimen processed by post-weld ultrasonic impact treatment[J]. Science and Technology of Welding and Joining, 2019, 24(3):193-199. (SCI二区，IF3.422，他引4次)

2018年

[28] Liu Chuan, Wang Chunjing, Cheng Xiaohua, et al. Experimental investigation on the residual stresses in a thick joint with a partial repair weld using multiple-cut contour method[J]. Materials, 2018, 44(4): 633. (SCI三区，IF 3.057，他引3次)

[27] Liu Chuan, Yang Jiawei, Shi Yifeng, et al. Modelling of residual stresses in a narrow-gap welding of ultra-thick curved steel mockup[J]. Journal of Materials Processing Technology, 2018, 256: 239-246. (SCI一区，IF 4.669，他引5次)

[26] Liu Chuan, Yang Jiawei, Shi Yifeng, et al. Investigation on narrow-gap welding residual stresses in ultra-thick ring-type mockups[J]. Materials Research Express, 2018, 5(1): No. 016526. (SCI四区，IF 1.929，他引1次)

[25] Liu Chuan, Yang Jiawei, Ge Qinglei, et al. Mechanical properties improvement of thick multi-pass weld by layered ultrasonic impact treatment[J]. Science and Technology of Welding and Joining, 2018, 23(2): 95-104. (SCI二区，IF 3.422，他引3次)

2017年

[24] Liu Chuan, Chen Dongjun, Hill MR*, et al. Effects of ultrasonic impact treatment on weld microstructure, hardness, and residual stress[J]. Materials Science and Technology, 2017, 33(14): 1601-1609. (SCI三区，IF 1.835，他引5次）

[23] Liu Chuan, Luo Ying, Yang Min, et al. Three-dimensional finite element simulation of welding residual stress in RPV with two J-groove welds[J]. Welding in the World, 2017, 61(1): 151-160. (SCI三区，IF 1.589，他引6次）

2016年

[22] Liu Chuan, Luo Ying, Yang Min, et al. Effects of material hardening model and lumped-pass method on welding residual stress simulation of J-groove weld in nuclear RPV[J]. Engineering Computations, 2016, 33(5): 1435-1450. (SCI四区，IF 1.322，他引2次)

[21] Liu Chuan, Ge Qinglei, Chen Dongjun, et al. Residual stress variation in a thick welded joint after ultrasonic impact treatment[J]. Science and Technology of Welding and Joining, 2016, 21(4): 624-631. (SCI二区，IF 3.422，他引10次）

2015年

[20] 付强，罗英，杨敏，刘川*．RPV顶盖和CRDM管座焊接残余应力三维数值模拟[J]．焊接学报，2015，36(11)：105-108．(EI，通讯作者)

(Fu Qiang, Luo Ying, Yang Min, Liu Chuan*. Three-dimensional numerical simulation on welding residual stress in weld between RPV head and CRDM nozzle[J]. Transactions of the China Welding Institution, 2015, 36(11): 105-108)

[19] 刘川，冯俊，朱海洋，李良碧．基于轮廓法测试惯性摩擦焊接头内部残余应力[J]．焊接学报，2015，36(6)：1-4．(EI)

(Liu Chuan, Feng Jun, Zhu Haiyang, et al. Internal residual stress measurement of inertia friction welding joints based on contour method[J]. Transactions of the China Welding Institution, 2015, 36(6): 1-4.)

2014年

[18] Liu Chuan, Zhu Haiyang, Dong ChunLin. Internal residual stress measurement on inertia friction welding of nickel-based superalloy[J]. Science and Technology of Welding and Joining, 2014, 19(5): 408-415. (SCI二区，IF 3.422，他引10次)

[17] Liu Chuan, Dong Chun-lin. Internal residual stress measurement on linear friction welding of titanium alloy plates with contour method[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(5): 1387-1392. (SCI二区，IF 2.615，他引9次)

[16] 董春林，刘川*．基于轮廓法测试镍基高温合金惯性摩擦焊接头内部残余应力[J].稀有金属材料与工程，2014，43(3)：605-609．(SCI四区，IF 0.485，通讯作者）

(Dong Chunlin, Liu Chuan*. Experimental measurement of internal residual stress in nickel-base superalloy inertia friction weld using the contour method[J]. Rare Metal Materials and Engineering, 2014, 43(3): 605-609.)

2013年

[15] 方臣富，吴文烈，刘川*，钟绪浪．基于固有应变法预测双丝气保焊液压支架顶梁变形[J]．焊接学报，2013，34(11)：1-4．(EI，通讯作者)

(Fang Chenfu, Wu Wenlie, Liu Chuan*, et al. Welding deformation of top beam structure in hydraulic support by CO2 double-wire gas shield welding based on inherent strain method[J]. Transactions of the China Welding Institution, 2013, 34(3): 605-609.)

[14] Liu Chuan, Yi Xiang. Residual stress measurement on AA6061-T6 aluminum alloy friction stir butt welds using contour method[J]. Materials & Design, 2013, 46: 366–371. (SCI一区，IF 6.289，他引28)

2012年

[13] 方臣富，王海松，刘川*，等．缆式焊丝CO2气体保护焊接头残余应力高效数值计算和实验[J]．焊接学报，2012，33(5)：17-20．(EI，通讯作者)

(Fang Chengfu, Wang Haisong, Liu Chuan*, et al.  Efficient numerical simulation and experimental study on residual stress induced by GMAW with cable-type wire[J]. Transactions of the China Welding Institution, 2012, 33(5): 17-20.)

[12] 刘川，庄栋．基于轮廓法测试焊接件内部残余应力[J]．机械工程学报，2012，48(8)：54-59．(EI)

(Liu Chuan, Zhuang Dong. Internal welding residual stress measurement based on contour method[J]. Journal of Mechanical Engineering, 2012, 48(8): 54-59.)

[11] Liu Chuan, Zhang Jianxun, Wu Bing, et al. Numerical investigation on the variation of welding stresses after material removal from a thick titanium alloy plate joined by electron beam welding[J]. Materials & Design, 2012, 34: 607-617. (SCI一区，IF 6.289，他引20次)

2011年

[10] Liu Chuan, Zhang Jianxun, Xue Chengbo. Numerical investigation on residual stress distribution and evolution during multi-pass narrow gap welding of thick-walled stainless steel pipes[J]. Fusion Engineering and Design, 2011, 86(4-5): 288-295. (SCI三区，IF 1.692，他引39次)

[9] Liu Chuan, Zhang Jianxun. Numerical and experimental investigations on the modification of as-welded residual stress after local material removal[J]. Journal of Strain Analysis for Engineering Design, 2011, 46(6): 444-455.(SCI四区 IF 1.63，他引6次)

2010年

[8] Liu Chuan, Wu Bing, Zhang Jianxun. Numerical investigation of residual stress in thick titanium alloy plate joined with electron beam welding[J]. Metallurgical and Materials Transactions B, 2010, 41(5):1129-1138. (SCI二区，IF 2.035，他引20次)

[7] 刘川，张建勋，牛靖．焊接动态拘束变形三维多体耦合数值计算[J]．机械工程学报，2010，46(6)：83-86．(EI)

(Liu Chuan, Zhang Jianxun, Niu Jing. 3D multi-body coupling numerical simulation of welding distortion with restraints[J]. Journal of MechanicaL Engineering, 2010, 46(6): 83-86.)

2009年

[6] Liu Chuan, Zhang Jianxun. Numerical simulation of transient welding angular distortion with external restraints[J]. Science and Technology of Welding & Joining, 2009, 14(1): 26-31. (SCI二区，IF3.422，他引15次)

[5] Liu Chuan, Zhang Jianxun. Investigation of external restraining force effects on welding residual stresses using 3D thermal elastic-plastic multi-body coupling FE model[J]. Proceedings of the Institution of Mechanical Engineers. Part B-Journal of Engineering Manufacture, 2009, 223(12): 1591-1600. (SCI四区，IF 1.982，他引4次)

[4] Liu Chuan, Zhang Jianxun, Niu Jing. Numerical and experimental analysis of residual stresses in full-penetration laser beam welding of Ti6Al4V alloy[J]. Rare Metal Materials and Engineering, 2009, 38(8): 1317-1320. (SCI四区，IF 0.485，他引12次)

2008年

[3] 刘川，张建勋．基于动态子结构的三维焊接残余应力变形数值计算[J]．焊接学报，2008，29(4)：21-24．(EI)

(Liu Chuan, Zhang Jianxun. Numerical simulation of welding stresses and distortions based on 3D dynamic substructure method[J]. Transactions of the China Welding Institution, 2008, 29(4): 21-24.)

[2] 刘川，张建勋，张林杰．基于焊缝形状的二维焊接温度场模拟热源模型[J]．材料热处理学报，2008，29(2)：178-180．(EI)

(Liu Chuan, Zhang Jianxun, Zhang Linjie. Heat source model for 2D welding temperature field simulation based on the configuration of welding line[J]. Transactions of Materials and Heat Treatment, 2008, 29(2): 178-180.)

2007年

[1] 刘川，王蕊，张建勋．堆焊角变形动态过程试验与数值分析[J]．西安交通大学学报，2007，41(9)：1017-1021．(EI)

(Liu Chuan, Wang Rui, Zhang Jianxun. Numerical simulation and testing of dynamic welding angular distortion for overlayer[J]. Journal of Xi’an Jiaotong University, 2017, 41(9): 1017-1021.)