材料科学与工程学院
通讯地址：江苏省镇江市丹徒区长晖路666号
个人邮箱：jinhua1993@just.edu.cn
邮政编码：212000
办公地点：材料楼422
传真：
彭金华，男，安徽阜阳人，工学博士，硕士生导师，江苏省科技副总。2015年毕业于东北大学材料科学与工程专业，获工学学士学位，2020年毕业于合肥工业大学材料科学与工程专业，获工学博士学位。多年来主要从事镁及镁合金的塑性变形行为、镁基复合材料、再生铝合金等课题的研究，在镁合金的组织和织构调控、塑性变形机制分析、镁基复合材料的制备工艺等方面积累了丰富的研究基础，主持国家级课题1项，省部级课题3项，参与多项国家级和省（部）级课题。以第一/通讯作者在Materials Science and Engineering: A，Journal of Magnesium and Alloys，Journal of Materials Processing Technology， Journal of Alloys and Compounds等国内外期刊发表SCI收录论文二十余篇。
1. 镁/镁合金的塑性变形行为及相关基础研究
2. 高性能镁基复合材料的制备工艺和性能调控
3. 再生铝合金成分设计和热变形行为
国家自然科学基金青年基金，基于内耗理论的室温挤压超细晶纯镁的变形机制及定量模型研究，52405369，2025.1-2027.12.
江苏省基础研究计划（自然科学基金）青年基金，弱织构镁合金中纳米陶瓷颗粒和晶粒的交互作用和协同增强机制，BK20210891，2021.7-2024.6.
广东省基础与应用基础研究基金项目，纳米陶瓷颗粒和晶粒细化对弱织构镁合金的协同增强机制研究，2021A1515110178，2021.10-2024.9.
2.Zongyuan Cheng, Tao Fang, Jinhua Peng*. A method for predicting the yield strength of AZ31 magnesium alloy bars processed by ambient extrusion, Materials Letter, 2024, 367:136585.
3.Jinhua Peng, Fengze Pan, Zexin Wang, Liangyu Chen, Chengyu Pan, Dubovyy Oleksandr, Sheng Lu*. Investigation of the interface and physical properties of a Kovar alloy/Cu composite wire processed by multi-pass drawing, High Temperature and Processes, 2024, 43:20240024.
4.Jinhua Peng, Xiaoxin Hu, Pengfei Zhao, Zexin Wang, Liangyu Chen, Dubovyy Olesandr, Sheng Lu*. Interrupted tensile tests to reveal the non‑uniform tensile deformation of AZ31 magnesium alloy welding joint processed by friction stir welding, Journal of Material Science, 2024, 59: 4649-4661.
5.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Qianhao Zang, Liangyu Chen, Tingting Guo, Sheng Lu. Tension-compression asymmetry and Bauschinger-like effect of AZ31 magnesium alloy bars processed by ambient extrusion, Materials Science and Engineering A, 2023, 862: 144353.
6.彭金华, 胡孝鑫, 陈靓瑜, Maksym Bobrov, 芦笙*. 搅拌摩擦焊接镁合金微区织构研究现状与展望, 江苏科技大学学报, 2023, 37: 28-34.
7.Jinhua Peng, Zhen Zhang, Huanhuan Chen, Haigen Wei*, Liangyu Chen, Qianhao Zang, Sheng Lu. Texture weakening effect from {1011} twins induced static recrystallization in ambient extrusion AZ31 magnesium alloy, Journal of Alloys and Compounds, 2023, 960, 173738.
8.Longhai Hu, Jinhua Peng*, Xiaoxin Hu, Liangyu Chen, Maksym Bobrov, Sheng Lu. Effect of FS-SMAT on microstructure and mechanical property of pure magnesium and AZ31 magnesium alloy, Heat Treatment and Surface Engineering, 2023, 5: 2171768.
9.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Liangyu Chen, Qianhao Zang, Sheng Lu, Tingting Guo, Wei Zhou, Yucheng Wu. Ambient extrusion induced working hardening and their effect on
10.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Liangyu Chen, Qianhao Zang, Sheng Lu, Tingting Guo, Wei Zhou, Yucheng Wu. Ambient extrusion induced working hardening and their effect on mechanical properties in AZ31 hot-extrusion bar, Materials Science and Engineering A, 2022, 832: 142437.
11.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Chang Long, Yong Wu, Ji’an Huang, Wei Zhou, Yucheng Wu. Investigation on the anisotropy of mechanical properties along different orientations of an AZ31 hot-extrusion bar. Journal of Alloys and Compounds, 2021, 854: 157108.
12.Zhen Zhang1, Jinhua Peng1, Ji’an Huang, Peng Guo, Zhao Liu, Shichao Song, Yu Wang*. 
twinning nucleation in magnesium assisted by alternative sweeping of partial dislocations via an intermediate precursor. Journal of Magnesium and Alloys, 2020, 8(4): 1102-1108.
13.Jinhua Peng, Zhen Zhang*, Ji’an Huang, Peng Guo, Wei Zhou, Yucheng Wu. The effect of grain size on texture evolution and mechanical properties of an AZ31 magnesium alloy during cold-rolling process. Journal of Alloys and Compounds, 2020, 817: 153302.
14.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Yaozu Li, Wei Zhou, Yucheng Wu. Improving the plastic homogeneity of a magnesium alloy by introducing high volume fraction of twins during ambient extrusion. Journal of Materials Processing Technology, 2020, 277: 116445.
15.Jinhua Peng, Zhen Zhang*, Chang Long, Huanhuan Chen, Yong Wu, Ji’an Huang, Wei Zhou, Yucheng Wu. Effect of crystal orientation and twins on the corrosion behaviour of AZ31 magnesium alloy. Journal of Alloys and Compounds, 2020, 827: 154096.
16.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Wei Zhou, Yucheng Wu. Microstructure and tensile properties of SiC particles reinforced AZ31 magnesium alloys prepared by multi-pass friction stir processing. Transactions of the Indian Institute of Metals, 2020, 73: 1093-1099.
17.Jinhua Peng, Zhen Zhang*, Ji’an Huang, Peng Guo, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of the inhomogeneous microstructure and texture on the mechanical properties of AZ31 Mg alloys processed by friction stir processing. Journal of Alloys and Compounds, 2019, 792: 16-24.
18.Jinhua Peng, Zhen Zhang*, Peng Guo, Zhao Liu, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of surface mechanical attrition treatment on texture evolution and mechanical properties of AZ31 magnesium alloy. Materials Characterization, 2019, 148: 26-34.
19.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of contraction twins and shear bands on the texture evolution during isothermal annealing and its effect on mechanical properties of AZ31 magnesium alloys. Materials Science and Engineering A, 2019, 763: 138100.
20.Jinhua Peng, Zhen Zhang*, Pengju Yang, Yaozu Li, Peng Guo, Wei Zhou, Yucheng Wu. The effect of continuous confined strip shearing deformation on the mechanical properties of AZ31 magnesium alloys. Materials Science and Engineering A, 2019, 743: 397-403.
21.Jinhua Peng, Zhen Zhang*, Zhao Liu, Yaozu Li, Peng Guo, Wei Zhou, Yucheng Wu. The effect of texture and grain size on improving the mechanical properties of Mg-Al-Zn alloys by friction stir processing. Scientific Reports, 2018, 8: 4196.
22.Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu. Twinning-induced dynamic recrystallization and micro-plastic mechanism during hot-rolling process of a magnesium alloy. Materials Science and Engineering A, 2017, 699: 99-105.
23.Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu. A special band structure perpendicular to the basal planes formed in a magnesium alloy during hot-rolling process. Materials Science and Engineering A, 2017, 703: 244-250.
国家自然科学基金青年基金，基于内耗理论的室温挤压超细晶纯镁的变形机制及定量模型研究，52405369，2025.1-2027.12.
江苏省基础研究计划（自然科学基金）青年基金，弱织构镁合金中纳米陶瓷颗粒和晶粒的交互作用和协同增强机制，BK20210891，2021.7-2024.6.
广东省基础与应用基础研究基金项目，纳米陶瓷颗粒和晶粒细化对弱织构镁合金的协同增强机制研究，2021A1515110178，2021.10-2024.9.
2.Zongyuan Cheng, Tao Fang, Jinhua Peng*. A method for predicting the yield strength of AZ31 magnesium alloy bars processed by ambient extrusion, Materials Letter, 2024, 367:136585.
3.Jinhua Peng, Fengze Pan, Zexin Wang, Liangyu Chen, Chengyu Pan, Dubovyy Oleksandr, Sheng Lu*. Investigation of the interface and physical properties of a Kovar alloy/Cu composite wire processed by multi-pass drawing, High Temperature and Processes, 2024, 43:20240024.
4.Jinhua Peng, Xiaoxin Hu, Pengfei Zhao, Zexin Wang, Liangyu Chen, Dubovyy Olesandr, Sheng Lu*. Interrupted tensile tests to reveal the non‑uniform tensile deformation of AZ31 magnesium alloy welding joint processed by friction stir welding, Journal of Material Science, 2024, 59: 4649-4661.
5.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Qianhao Zang, Liangyu Chen, Tingting Guo, Sheng Lu. Tension-compression asymmetry and Bauschinger-like effect of AZ31 magnesium alloy bars processed by ambient extrusion, Materials Science and Engineering A, 2023, 862: 144353.
6.彭金华, 胡孝鑫, 陈靓瑜, Maksym Bobrov, 芦笙*. 搅拌摩擦焊接镁合金微区织构研究现状与展望, 江苏科技大学学报, 2023, 37: 28-34.
7.Jinhua Peng, Zhen Zhang, Huanhuan Chen, Haigen Wei*, Liangyu Chen, Qianhao Zang, Sheng Lu. Texture weakening effect from {1011} twins induced static recrystallization in ambient extrusion AZ31 magnesium alloy, Journal of Alloys and Compounds, 2023, 960, 173738.
8.Longhai Hu, Jinhua Peng*, Xiaoxin Hu, Liangyu Chen, Maksym Bobrov, Sheng Lu. Effect of FS-SMAT on microstructure and mechanical property of pure magnesium and AZ31 magnesium alloy, Heat Treatment and Surface Engineering, 2023, 5: 2171768.
9.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Liangyu Chen, Qianhao Zang, Sheng Lu, Tingting Guo, Wei Zhou, Yucheng Wu. Ambient extrusion induced working hardening and their effect on
10.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Liangyu Chen, Qianhao Zang, Sheng Lu, Tingting Guo, Wei Zhou, Yucheng Wu. Ambient extrusion induced working hardening and their effect on mechanical properties in AZ31 hot-extrusion bar, Materials Science and Engineering A, 2022, 832: 142437.
11.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Chang Long, Yong Wu, Ji’an Huang, Wei Zhou, Yucheng Wu. Investigation on the anisotropy of mechanical properties along different orientations of an AZ31 hot-extrusion bar. Journal of Alloys and Compounds, 2021, 854: 157108.
12.Zhen Zhang1, Jinhua Peng1, Ji’an Huang, Peng Guo, Zhao Liu, Shichao Song, Yu Wang*. twinning nucleation in magnesium assisted by alternative sweeping of partial dislocations via an intermediate precursor. Journal of Magnesium and Alloys, 2020, 8(4): 1102-1108.
13.Jinhua Peng, Zhen Zhang*, Ji’an Huang, Peng Guo, Wei Zhou, Yucheng Wu. The effect of grain size on texture evolution and mechanical properties of an AZ31 magnesium alloy during cold-rolling process. Journal of Alloys and Compounds, 2020, 817: 153302.
14.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Yaozu Li, Wei Zhou, Yucheng Wu. Improving the plastic homogeneity of a magnesium alloy by introducing high volume fraction of twins during ambient extrusion. Journal of Materials Processing Technology, 2020, 277: 116445.
15.Jinhua Peng, Zhen Zhang*, Chang Long, Huanhuan Chen, Yong Wu, Ji’an Huang, Wei Zhou, Yucheng Wu. Effect of crystal orientation and twins on the corrosion behaviour of AZ31 magnesium alloy. Journal of Alloys and Compounds, 2020, 827: 154096.
16.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Wei Zhou, Yucheng Wu. Microstructure and tensile properties of SiC particles reinforced AZ31 magnesium alloys prepared by multi-pass friction stir processing. Transactions of the Indian Institute of Metals, 2020, 73: 1093-1099.
17.Jinhua Peng, Zhen Zhang*, Ji’an Huang, Peng Guo, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of the inhomogeneous microstructure and texture on the mechanical properties of AZ31 Mg alloys processed by friction stir processing. Journal of Alloys and Compounds, 2019, 792: 16-24.
18.Jinhua Peng, Zhen Zhang*, Peng Guo, Zhao Liu, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of surface mechanical attrition treatment on texture evolution and mechanical properties of AZ31 magnesium alloy. Materials Characterization, 2019, 148: 26-34.
19.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of contraction twins and shear bands on the texture evolution during isothermal annealing and its effect on mechanical properties of AZ31 magnesium alloys. Materials Science and Engineering A, 2019, 763: 138100.
20.Jinhua Peng, Zhen Zhang*, Pengju Yang, Yaozu Li, Peng Guo, Wei Zhou, Yucheng Wu. The effect of continuous confined strip shearing deformation on the mechanical properties of AZ31 magnesium alloys. Materials Science and Engineering A, 2019, 743: 397-403.
21.Jinhua Peng, Zhen Zhang*, Zhao Liu, Yaozu Li, Peng Guo, Wei Zhou, Yucheng Wu. The effect of texture and grain size on improving the mechanical properties of Mg-Al-Zn alloys by friction stir processing. Scientific Reports, 2018, 8: 4196.
22.Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu. Twinning-induced dynamic recrystallization and micro-plastic mechanism during hot-rolling process of a magnesium alloy. Materials Science and Engineering A, 2017, 699: 99-105.
23.Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu. A special band structure perpendicular to the basal planes formed in a magnesium alloy during hot-rolling process. Materials Science and Engineering A, 2017, 703: 244-250.
国家自然科学基金青年基金，基于内耗理论的室温挤压超细晶纯镁的变形机制及定量模型研究，52405369，2025.1-2027.12.
江苏省基础研究计划（自然科学基金）青年基金，弱织构镁合金中纳米陶瓷颗粒和晶粒的交互作用和协同增强机制，BK20210891，2021.7-2024.6.
广东省基础与应用基础研究基金项目，纳米陶瓷颗粒和晶粒细化对弱织构镁合金的协同增强机制研究，2021A1515110178，2021.10-2024.9.
2.Zongyuan Cheng, Tao Fang, Jinhua Peng*. A method for predicting the yield strength of AZ31 magnesium alloy bars processed by ambient extrusion, Materials Letter, 2024, 367:136585.
3.Jinhua Peng, Fengze Pan, Zexin Wang, Liangyu Chen, Chengyu Pan, Dubovyy Oleksandr, Sheng Lu*. Investigation of the interface and physical properties of a Kovar alloy/Cu composite wire processed by multi-pass drawing, High Temperature and Processes, 2024, 43:20240024.
4.Jinhua Peng, Xiaoxin Hu, Pengfei Zhao, Zexin Wang, Liangyu Chen, Dubovyy Olesandr, Sheng Lu*. Interrupted tensile tests to reveal the non‑uniform tensile deformation of AZ31 magnesium alloy welding joint processed by friction stir welding, Journal of Material Science, 2024, 59: 4649-4661.
5.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Qianhao Zang, Liangyu Chen, Tingting Guo, Sheng Lu. Tension-compression asymmetry and Bauschinger-like effect of AZ31 magnesium alloy bars processed by ambient extrusion, Materials Science and Engineering A, 2023, 862: 144353.
6.彭金华, 胡孝鑫, 陈靓瑜, Maksym Bobrov, 芦笙*. 搅拌摩擦焊接镁合金微区织构研究现状与展望, 江苏科技大学学报, 2023, 37: 28-34.
7.Jinhua Peng, Zhen Zhang, Huanhuan Chen, Haigen Wei*, Liangyu Chen, Qianhao Zang, Sheng Lu. Texture weakening effect from {1011} twins induced static recrystallization in ambient extrusion AZ31 magnesium alloy, Journal of Alloys and Compounds, 2023, 960, 173738.
8.Longhai Hu, Jinhua Peng*, Xiaoxin Hu, Liangyu Chen, Maksym Bobrov, Sheng Lu. Effect of FS-SMAT on microstructure and mechanical property of pure magnesium and AZ31 magnesium alloy, Heat Treatment and Surface Engineering, 2023, 5: 2171768.
9.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Liangyu Chen, Qianhao Zang, Sheng Lu, Tingting Guo, Wei Zhou, Yucheng Wu. Ambient extrusion induced working hardening and their effect on
10.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Liangyu Chen, Qianhao Zang, Sheng Lu, Tingting Guo, Wei Zhou, Yucheng Wu. Ambient extrusion induced working hardening and their effect on mechanical properties in AZ31 hot-extrusion bar, Materials Science and Engineering A, 2022, 832: 142437.
11.Jinhua Peng, Zhen Zhang*, Huanhuan Chen, Chang Long, Yong Wu, Ji’an Huang, Wei Zhou, Yucheng Wu. Investigation on the anisotropy of mechanical properties along different orientations of an AZ31 hot-extrusion bar. Journal of Alloys and Compounds, 2021, 854: 157108.
12.Zhen Zhang1, Jinhua Peng1, Ji’an Huang, Peng Guo, Zhao Liu, Shichao Song, Yu Wang*. twinning nucleation in magnesium assisted by alternative sweeping of partial dislocations via an intermediate precursor. Journal of Magnesium and Alloys, 2020, 8(4): 1102-1108.
13.Jinhua Peng, Zhen Zhang*, Ji’an Huang, Peng Guo, Wei Zhou, Yucheng Wu. The effect of grain size on texture evolution and mechanical properties of an AZ31 magnesium alloy during cold-rolling process. Journal of Alloys and Compounds, 2020, 817: 153302.
14.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Yaozu Li, Wei Zhou, Yucheng Wu. Improving the plastic homogeneity of a magnesium alloy by introducing high volume fraction of twins during ambient extrusion. Journal of Materials Processing Technology, 2020, 277: 116445.
15.Jinhua Peng, Zhen Zhang*, Chang Long, Huanhuan Chen, Yong Wu, Ji’an Huang, Wei Zhou, Yucheng Wu. Effect of crystal orientation and twins on the corrosion behaviour of AZ31 magnesium alloy. Journal of Alloys and Compounds, 2020, 827: 154096.
16.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Wei Zhou, Yucheng Wu. Microstructure and tensile properties of SiC particles reinforced AZ31 magnesium alloys prepared by multi-pass friction stir processing. Transactions of the Indian Institute of Metals, 2020, 73: 1093-1099.
17.Jinhua Peng, Zhen Zhang*, Ji’an Huang, Peng Guo, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of the inhomogeneous microstructure and texture on the mechanical properties of AZ31 Mg alloys processed by friction stir processing. Journal of Alloys and Compounds, 2019, 792: 16-24.
18.Jinhua Peng, Zhen Zhang*, Peng Guo, Zhao Liu, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of surface mechanical attrition treatment on texture evolution and mechanical properties of AZ31 magnesium alloy. Materials Characterization, 2019, 148: 26-34.
19.Jinhua Peng, Zhen Zhang*, Peng Guo, Ji’an Huang, Yaozu Li, Wei Zhou, Yucheng Wu. The effect of contraction twins and shear bands on the texture evolution during isothermal annealing and its effect on mechanical properties of AZ31 magnesium alloys. Materials Science and Engineering A, 2019, 763: 138100.
20.Jinhua Peng, Zhen Zhang*, Pengju Yang, Yaozu Li, Peng Guo, Wei Zhou, Yucheng Wu. The effect of continuous confined strip shearing deformation on the mechanical properties of AZ31 magnesium alloys. Materials Science and Engineering A, 2019, 743: 397-403.
21.Jinhua Peng, Zhen Zhang*, Zhao Liu, Yaozu Li, Peng Guo, Wei Zhou, Yucheng Wu. The effect of texture and grain size on improving the mechanical properties of Mg-Al-Zn alloys by friction stir processing. Scientific Reports, 2018, 8: 4196.
22.Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu. Twinning-induced dynamic recrystallization and micro-plastic mechanism during hot-rolling process of a magnesium alloy. Materials Science and Engineering A, 2017, 699: 99-105.
23.Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu. A special band structure perpendicular to the basal planes formed in a magnesium alloy during hot-rolling process. Materials Science and Engineering A, 2017, 703: 244-250.
2015.09-2020.06 合肥工业大学 材料科学与工程学院 博士
2011.09-2015.06 东北大学 资源与材料学院 学士
2008.09-2011.06 临泉县第一中学
本科-《材料科学基础C》、《认识实习》、《生产实习》
研究生-《材料表面与界面》
学校地址：江苏省镇江市丹徒区长晖路666号
邮编：212100
TEL:0511-84402122
版权所有©2013-2022 江苏科技大学 苏ICP备05063164号
