头像
发表论文
Email:
Office:
Address:
PostCode:
Fax:

您是第268 Access

  • Introduction

  • Research Focus

    [1]   Cai, Yang, Xinzi Liu, Yu Sun, Xiaojun Fan, and Jiao Wang. 2024. Unique Coolant Supply Passage Arrangements to Induce Large-Scale Vortex within Turbine Blade Interior Leading Edge Chambers Energies 17, no. 14: 3404. https://doi.org/10.3390/en17143404

    [2]    Xiaojun Fan; Numerical research of a new vortex double wall cooling configuration for gas turbine blade leading edge[J]. International Journal of Heat and Mass Transfer, 2022. (SCI)

    [3]    Xiaojun Fan; Xue yuan; Numerical investigation of nozzle geometry influence on the vortex cooling in an actual gas turbine blade leading edge cooling system[J]. Heat and Mass Transfer, 2021. (SCI)

    [4]    Fan Xiaojun, Chuangxin He, Lian Gan, Liang Li, Changhe Du. Experimental study of swirling flow characteristics in a semi cylinder vortex cooling configuration.[J]. Experimental Thermal and Fluid Science, 2020.

    [5]    Fan Xiaojun, Li Liang, Wang Jiefeng, Wu Fan. Heat transfer enhancement for gas turbine blade leading edge cooling using curved double-wall/vortex cooling with various disturbing objects[C]. ASME Paper GT2019-90211, 2019.

    [6]    Fan Xiaojun, Li Liang, Zou Jiasheng, Zhou yuanyuan. Cooling methods for gas turbine blade leading edge: Comparative study on impingement cooling, vortex cooling and double vortex cooling[J]. International Communications in Heat and Mass Transfer, 2019, 100: 133-145.

    [7]    Fan Xiaojun, Li Liang, Zou Jiasheng, Wang Jiefeng, Wu Fan. Local heat transfer of vortex cooling with multiple tangential nozzles in a gas turbine blade leading edge cooling passage[J].International Journal of Heat and Mass Transfer, 2018, 126: 377-389.

    [8]    Fan Xiaojun, Du Changhe, Li Liang, Li Sen. Numerical simulation on effects of film hole geometry and mass flow on vortex cooling behavior for gas turbine blade leading edge[J]. Applied Thermal Engineering, 2017, 112: 472-483.

    [9]    范小军, 杜长河, 李亮, 李森. 气膜孔几何位置对旋流冷却流动与传热特性的影响[J]. 西安交通大学学报, 2016, 50(7): 32-38.

    [10]    范小军，李亮, 李森，张翔. 平板和静叶表面气流-水膜耦合流动特性的数值研究[J]. 西安交通大学学报, 2016, 50(11):7-13.

    [11]  范小军, 杜长河, 李亮,邹佳生. 4种冷却结构对叶片前缘流动换热影响的比较研究[J]. 西安交通大学学报, 2017, 51(7):37-43.

    [12]  范小军，邹佳生，周源远，李亮．喷嘴数目和温比对旋流冷却流动和传热特性影响的研究[J]. 西安交通大学学报, 2018, 52(3): 19-24．

    [13]  范小军，杜长河，周源远，李亮，丰镇平．复合冲击和复合旋流冷却特性的对比研究[J]. 工程热物理学报, 2018, 39(12): 2627-2633．

  • Education Background

  • Teaching